1.
Research on Deep Small Hole Machining Based on Analysis of Flow Field
基于流场分析的微细电火花深小孔加工的研究
2.
Fluid Field Simulation of Debris Driven During Small Hole Permanent Magnetic Field And EDM Compound Drilling
永磁电火花复合深小孔加工流场排屑模拟
3.
Gap Flow Research for Deep-Small Hole Drilling by EDM Based on Fluent Software
基于Fluent电火花深小孔加工间隙流场的研究
4.
Research on Technologic Experiment about Edge Quality of Small-deep Hole Finished by Pulse Electrochemical Technology
基于脉冲电化学光整加工技术的深小孔棱边质量实验研究
5.
The optimum water depth increases as the aperture of the aerator increases.
水深较小时,宜选用孔径较小的曝气器;
6.
high efficiency drilling system for small and deep hole
高效小直径深孔钻削系统
7.
Rapid EDM systems for micro and small holes with high-aspect-ratio
大深径比微小孔快速电火花加工系统
8.
The Academic Optimization of Cutting Parameter of Machining Small-deep Hole
小直径深孔加工切削用量的实验优选
9.
Research on the Optimization of Medium-length Hole Blasting Technique in Small Mines
小型矿山中深孔爆破工艺的优化探索
10.
An experimental study of drilling small and deep blind holes with an abrasive water jet
磨料水射流钻削深小盲孔的试验研究
11.
Test of Large Hole Distance and Small Resistant Line Blasting Technique in Underground Stope
大孔距小抵抗线爆破技术在地下中深孔采场中的试验
12.
Processing Technical Study for Steam DrumTemperature-Measuring Seat Small Bore Deep Blind-Hole
汽包测温座小口径深盲孔的加工工艺研究
13.
A Theoretical and Experimental Investigation on Keyhole Effects in Deep Penetration Laser Welding;
激光深溶焊接小孔效应的理论和试验研究
14.
A Theoretical and Experimental Study on Keyhole Effects in Laser Deep Penetration Welding;
激光深熔焊接小孔效应的理论和试验研究
15.
Experimental analysis of artificial deep foundation with large diameter and length shorter than 6 metres
长度小于6m的大直径人工挖孔深基础试验研究
16.
Simulation of the keyhole formation during deep penetration welding using an adaptive heat source model
用自适应热源模型模拟深熔焊小孔的形成过程
17.
Recent advance in research for keyhole behavior during laser deep penetration welding process
激光深熔焊接过程中小孔行为的研究进展
18.
Applying of Ultrasonic Vibration Drilling on Micro and Small Hole Machining
振动钻削技术在深小微孔加工中的应用