1.
Suitable for ferrous and nonferrous metals.It is really a multi-purpose neat cutting oil.
可用于铁及非金属，是真正的多用途性切削油。
2.
oil consisting chiefly of olein that is expressed from lard and used especially as a lubricant, cutting oil or illuminant.
主要由从脂肪中榨出的油酸脂构成的油，尤其用作润滑剂、切削油或照明剂。
3.
It is a specialist of manufacturing industrial lubricants including neat cutting oils, soluble cutting oils and equipment oils.
专门制高品质工业润滑油，如水溶性及油性切削液、备油等。
4.
generating cutting
滚(齿)切(削)法
5.
With different cutting parameter, the influence is different.
在不同的切削参数下,油膜减振支承对表面切削粗糙度有不同的影响。
6.
working major cutting edge
工作主[副]切削刃
7.
top plate cutting angle
顶片切削角 -锯链
8.
Semi-synthetic, biostable emulsion, containing mineral oil and EP additives.
半合成、生物稳定型切削液，含矿物基础油和极压添加剂。
9.
Determination of Nitrite in Oil-based Cutting Fluid and Machining Process Waste Fluid by Ion Chromatography
离子色谱法测定油基切削液和机床排泄物中亚硝酸根
10.
The Relationship between the Average Shear Angle in Vibration Cutting and the Shear Angle in Conventional Cutting
振动切削平均剪切角和普通切削剪切角的关系
11.
A roughing cut is usually to be followed by a finishing cut .
粗切削之后通常要精切削
12.
The cutting tool must be harder than the material to be cut.
切削刀具必须比要切削的材料硬。
13.
A chip shot.
切削球切削击球，近穴击球
14.
The Role of the Arc of Cutting Edge in Precision Metal Cutting
刀具切削刃圆弧在精密切削中的作用
15.
A Study of Stagnation Points on Cutting Edge
正交切削切削刃钝圆上分流点的研究
16.
The Effect of Cutting Conditions on the BuiIt.up Edge in Carbon Steel Cutting
切削碳钢时切削条件对积屑瘤的影响
17.
Cutting Force Modeling in Turning Based on Cutting Parameters in Face Cutting;
基于切削参数的端面加工切削力模型
18.
Study on Cutting Temperature under Ultrasonic Hard Turning 45 Hardened Steel
超声硬切削45淬硬钢的切削温度研究