1.
The differences in crystallinity between the HDPE after crystallized from the melt by cooling andthose obtained directly from the reactor were also studied and discussed.
观测聚乙烯熔体冷却结晶后的结晶度与初生态聚乙烯结晶度的差别。
2.
If this internal molten mass came bursting out and cooled very quickly it became granite;
假如这个内在的熔化体喷出后很快冷却，它就变成花岗石；
3.
As the jets of molten material emerge, they are cooled and solidified by contact with a stream of cold air, forming solid filaments. Many of these filaments are twisted together to form a yarn.
在熔融体一出现时,便被一股冷空气冷却而固化,多根长丝捻合在一起便形成纱线。
4.
Cooling the melt( in a quiescent state) to achieve the desired solid fraction.
冷却熔融金属（态下）得理想的固态粒度。
5.
Melted metal is poured into a mold to harden into shape.
熔化之金属倒入模子中以冷却成形。
6.
Welding parameter.( Reference values for electric socket welding-welding time and cooling time.
熔接参数(考数值为电承插热熔，热熔时间和冷却时间.
7.
The film index is higher than that of bulk glass of the same composition as the target, but prepared by rapid quenching from the melt.
薄膜折射率高于与靶成分相同的体型玻璃折射率，而此玻璃是由熔体迅速冷却制得的。
8.
Here, the melt cools and hardens until fully set-up. The mold is then opened, the piece ejected, and the sequence repeated.
熔体在模腔里冷却,硬化,直至完全固化。然后将模子打开,推出工件,并重复以上工序。
9.
The rock formed by the cooling and solidifying of molten rock.
熔岩融化的岩石冷却凝固后形成的岩石
10.
Afterwards let cool down the welding areas while still clamped in for as long as recommended.
之后仍然夹紧直到冷却到熔接范围要求.
11.
a kind of natural glass produced when molten lava cools very rapidly.
一种天然玻璃，由熔化的火山岩快速冷却形成。
12.
having the property of softening or fusing when heated and of hardening and becoming rigid again when cooled.
有软化或熔化的特性，当加热时变软、冷却时变硬。
13.
Melt Flow in the Extrusion Die Head for Blown Film and Application of Cooling Control Technology
吹膜机头内熔料流动及冷却控制技术应用
14.
Neutronics Study on Hybrid Reactor Cooled by Helium,Water and Molten Salt
氦气、水和熔盐冷却的混合堆中子学性能研究
15.
To condense(a gas)by cooling.
通过冷却压缩（气体）
16.
critical cooling rate
马氏体临界冷却速度
17.
CYLINDER BLOCK COOLANT DRAIN PLUG
汽缸体冷却剂放油旋塞
18.
high temperature gas cooled reactor
高温气体冷却式反应堆