1.
Reform of ball mill shell liner distribution and connecting type
球磨机筒体衬板布局及连接方式的改造实践
2.
Reason Analysis of Bolt Breakdown Failure in Steel Ball Pulverizer Body and the Sheath Plate Reformation
钢球磨煤机筒体断螺栓原因分析及衬板改造
3.
diaphragm between crankcase top and cylider liner
曲国同箱顶和汽缸衬筒间隔板
4.
Based on the analyses of the structural feature and the requirements of functions of the composite bottle cover of the new kind,two fundamental components,the lining washer and the outer body,are abstracted into a plate and a cylinder with thin wall,respectively.
基于新型组合瓶盖的结构特点和功能分析,将该组合体基本件衬垫和外体抽象为薄板和薄壁圆筒.
5.
Align the bushing with the spring eye or shackle eye and tighten the nut at the socket wrench end of the threaded roTighten until the bushing is forced into the spring eye.
将衬套对准弹簧眼或U型钩眼，并在螺纹杆的套筒板手末端锁紧螺帽。锁紧直到衬套进入簧眼。
6.
Construction Technology of Integrated and Electrically Lifted Scaffold and Formwork System for Core-Tube Structure
核心筒整体电动升降脚手及模板体系施工技术
7.
Study on the Effect of Stress on Cylinder with the Structure of Saddle Top Plate
鞍座加强垫板结构对筒体应力影响的研究
8.
The construction technology of Qingdao Liuting International Airfiled’circular tower
青岛流亭国际机场塔台筒体模板施工工艺
9.
Connecting Form Betwween Shell Body and Tubesheet of Shell-and-Tube Heat Exchanger
管壳式换热器中壳程筒体与管板连接形式
10.
plate-enlargement ring
夹板衬圈, 涨圈簧
11.
Baffles: Baffles providing controlled air vectors into and through the fume hood shall be constructed from the same material as the liner.
扰流板：扰流板应该和内衬材料一致，其引导通风柜气体排除柜外。
12.
The Numerical Simulation of Voltage Fields for Monomer of Plan and Tube Structures in SOFC;
固体氧化物燃料电池平板和圆筒单体电势场数值模拟
13.
backgrey seam impression
印花衬布接缝痕（滚筒印花疵点）
14.
Stress Analysis of Flat Extrusion Container for Aluminum Wall-plate by Photoelastic and FEA Method;
大型整体壁板扁挤压筒的应力光弹性及有限元分析
15.
Research on Seismic Performance of Steel Plate Shear Wall-Core Tube Structure with Strengthened Story
带水平加强层钢板剪力墙芯筒结构体系的抗震性能研究
16.
The Finite Element Analysis on the Weld Residual Stress of the Pressure Vessel Cylinder and Plate Dome Based on ANSYS
基于ANSYS压力容器筒体与平板封头焊缝残余应力有限元分析
17.
jar of paper or paperboard, whether or nor waxed
纸筒或纸板筒,无论是否涂蜡
18.
textile spinning can of paper pulp paper or paperboard
纸浆、纸或板制的纺纱筒