说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 侧压系数
1.
Numerical simulation on influence coefficient of lateral pressure on broken zone of circular aperture
侧压系数对圆孔周边松动区破坏模式影响的数值试验研究
2.
Solution to initial horizontal stress and lateral earth pressure coefficient at rest by flat dilatometer tests
扁铲侧胀试验求解初始水平应力和静止侧压力系数
3.
Solution to lateral earth pressure coefficient at rest by flat dilatometer tests in Hangzhou
杭州地区用扁铲侧胀试验求解静止侧压力系数K_0的研究
4.
Finite element analysis on tunnel secondary lining with different coefficient of lateral pressure
不同侧压力系数隧道二次衬砌的有限元分析
5.
Seismic Active Earth Pressure and Lateral Coefficient of Retaining Wall
地震作用下挡土墙主动土压力分布与侧压力系数
6.
Numerical simulations of curved surface sidewall compression scramjet inlets with varied sweep angle and sidewall compression angle
变后掠角+变侧压角曲面压缩的高超侧压式进气道数值仿真
7.
Maximum Allowable Side Friction Factor
最大容许侧向摩擦系数
8.
CAD System Research of Side hydraulic Pressune Jar in Extrusion Modeling Presses Based on SolidWorks
基于SolidWorks挤压成形液压机侧液压缸CAD系统研究
9.
Research and Application of Automatic Voltage Control of Power Plant Side
电厂侧自动电压控制系统研究及应用
10.
The application of flat chisel lateral dilation test in resolving side bedding counterforce coefficient
扁铲侧胀试验求解侧向基床反力系数的应用
11.
IMPROVEMENT OF ANGLE STABILITY BY ADVANCED HIGH SIDE VOLTAGE CONTROL REGULATOR
采用高压侧电压控制改善系统的角度稳定性
12.
Analysis of the Voltage Phase between the High and Low Voltage Sides in the Phase B Connecting to the Ground System;
高低压侧TVB相接地系统的二次电压相量分析
13.
cupping(ductility) value
压延系数,引伸系数,拉伸系数,深拉系数
14.
Tests and Numerical Simulation on Characteristics of Self-Starting for Sidewall Compression Inlets;
侧压式进气道自起动特性数值模拟和实验研究
15.
Research on Stamping Forming Numerical Simulation for Side Beam Internal Plate Cover of Car
轿车侧梁内板顶盖冲压成形数值模拟研究
16.
Spline Function Solution for the Elastic Buckling Loads of Lateral Bracing Columns
侧向支撑压杆弹性屈曲的样条函数解法
17.
BACK ANALYSIS AND NUMERICAL SIMULATION OF EARTH PRESSURE AROUND PILE-ANCHOR SUPPORTING STRUCTURES IN DEEP PIT
深基坑桩锚支护侧土压力反分析及数值模拟
18.
Numerical Simulation of FEM of Automobile Seat Side Blank Stamping
汽车座椅侧板冲压成型有限元数值模拟