1.
The current status of metal anode diaphragm caustic soda produ ction in domestic chlor-alkali industry was detailed.
详细介绍了我国氯碱工业采用金属阳极隔膜法制烧碱的现状及与世界先进水平的差距。
2.
MA cell diaphragm cell with metal anodes
金属阳极隔膜电解槽
3.
The Properties of Alloy Element Introduced in Anodic Film by Hydrotalcite Precursor Method;
双羟基金属氧化物前驱体法引入合金元素制备铝复合阳极氧化膜及其性能研究
4.
Determination of Trace Arsenic in Natural Water with Anodic Stripping Voltammetry on Gold Film Electrode
金膜电极阳极溶出伏安法测定天然水中痕量砷
5.
A STUDY OF ANODIC STRIPPING VOLTAMMETRY OF TRACE ARSENIC ON GOLD FILM ELECTRODE
痕量砷在金膜电极上阳极溶出伏安法的研究
6.
A STUDY OF ANODIC STRIPPING VOLTAMMETRY OF TRACE TELLURIUM ON GOLD FILM ELECTRODE
痕量碲在金膜电极上阳极溶出伏安法的研究
7.
Anodizing of aluminium and its alloys--Assessment of quality of sealed anodic oxide coatings by measurement of the loss of mass after immersion in phosphoric-chromic acid solution
GB/T14952.1-1994铝及铝合金阳极氧化阳极氧化膜的封孔质量评定磷-铬酸法
8.
Anodizing of aluminium and its alloys--Assessment of sealing quality by measurement of the loss of mass after immersion in acid solution
GB/T14952.2-1994铝及铝合金阳极氧化阳极氧化膜的封孔质量评定酸浸法
9.
Anodizing of aluminium and aluminium alloys-Assessment of resistance of anodic oxide coatings to cracking by deformation
GB/T12967.5-1991铝及铝合金阳极氧化用变形法评定阳极氧化膜的抗破裂性
10.
Preparation of Ru Nanowire Array into Anodic Aluminum Oxide Pores by Electrochemical Deposition Method
多孔阳极氧化铝模板法制备金属钌纳米线阵列
11.
MODEL OF ANODIC DISSOLUTION OF METAL WITH MOH AND MO FILMS AND ITS CHAOTIC DYNAMICS
表面部分成膜金属阳极溶解模型及其振荡与混沌行为
12.
Research on Non-Noble Anode Electrocatalyst of Proton Exchange Membrane Fuel Cell;
质子交换膜燃料电池阳极非贵金属催化剂的研究
13.
Study on the Process of Metal Ions A.C. Deposited into Porous Anodic Alumina Film
多孔阳极氧化铝膜内交流电沉积金属粒子的历程研究
14.
Differences of design of power supply bewteen ionic membrane electrolyzer and electrolyzer with metal anode
离子膜电解槽与金属阳极电解槽供电设计的区别
15.
Detection of Trace Copper at Electropolymerized Porous Film and Gold Nanoparticles Modified Electrode with Anodic Stripping Voltammetry
多孔电聚合膜和纳米金修饰电极阳极溶出伏安法测定痕量铜
16.
The fabrication of metallic electrodes with a nanometer/angstrom sized gap on chip using electrochemical method
采用电化学法在芯片上制备金属电极的纳米／埃间隔
17.
Anodizing of aluminium and its alloys-Determination of quality of sealed anodic oxide coatings-Admittance method
GB/T11110-1989铝及铝合金阳极氧化阳极氧化膜的封孔质量的测定方法导纳法
18.
Test methods for thickness of anodic oxidation coatings on aluminium and aluminium alloys--Gravimetric method
GB/T8015.1-1987铝及铝合金阳极氧化膜厚度的试验方法重量法