1.
The Application of Partial Heat Treatment for Large-scale Spindle;
局部热处理工艺在大型主轴中的应用
2.
The Design and Optimization of a Spindle Grinding Equipment
大型主轴现场修复装置的设计与优化
3.
The Calculate of Large-Scale Hydraulic Turbine with Regard to Self-Balanced Static Pressure Axial Seal;
大型水轮机自平衡式静压主轴密封的流场计算
4.
The Finite Element Analysis of the NC Boring and Milling Machine Spindle Box
大型数控落地镗铣床主轴箱的有限元分析
5.
Structural Finite Element Analysis of Spindle Ram for Large-Scale Milling Planer
大型龙门铣床主轴滑枕结构有限元分析
6.
An optimization design method for bending rigidity of main shaft for large wind turbines
大型风力机主轴最佳抗弯刚度的设计方法
7.
Replacing precision-insert main bearings without removing the crankshaft requires about 5 hours. Removing and replacing the crankshaft requires several additional hours.
不拆曲轴更换精密嵌入型主轴承,大约需要5小时,拆卸和更换轴承要额外增加几小时。
8.
Accurate main shaft structure for heavy cutting, the main shaft is installed on a integrated main shaft head, with excellent rigidity for heavy cutting.
重切削精密主轴结构。主轴安装在一体成型主轴头，重切削刚性佳。
9.
Most modern automotive engines have precision-insert-type. main bearings which can be replaced without removing the crankshaft.
大多数现代汽车发动机的主轴承是精密嵌入型,不必拆下曲轴即可更换。
10.
This article introduces method of deformanon control of plane P during the welding of a large split runner without main shaft.
介绍了大型分瓣转轮无主轴焊接P平面变形控制的方法。
11.
The rear swingarm is supported on large pivot bearings, and it felt satisfyingly firm and rigid.
后叉部分则以大型转轴培林与主车架连结，感觉相当的牢固。
12.
Analysis the Force and Optimization Design for the Main Shaft Structure of the Large Mine Hoister;
大型矿井提升机主轴结构受力分析及其优化设计
13.
The Simulating Research on Active Control to the Low Frequency Vibration of a Large Rotor Shaft System with Multi-support;
大型多支承旋转轴系低频振动主动控制模拟研究
14.
The Finite Element Analysis and Optimization of the NC Boring and Milling Machine Spindle Box
大型数控落地镗铣床主轴箱的有限元分析及优化设计
15.
Fracture Failure Analysis of Heavy Metallurgic Casting Lifting Reducer Gear Shaft
大型冶金铸造吊主起升减速机齿轮轴断裂失效分析
16.
Design and optimization of trussed supporting structure for off-axis three-mirror reflective space camera
大型离轴三反相机桁架式主支撑结构的设计与优化
17.
FKM mainly produces rolls and roll coverings made from nonwoven materials and polyurethane.
FKM主要生产大型棍子和辊轴制品，分别具备无纺布与聚氨酯覆盖面两大类型。
18.
Choice of Main Bearing of Cutting Part for Longitudinal Roadheader
纵轴式掘进机截割部主轴承的选型分析