1.
Position the cylinder heads onto head gaskets and cylinder block.
将汽缸盖安置到汽缸盖罩垫和汽缸体上。
2.
Remove the crankshaft from the cylinder block (refer to Cylinder Block Disassemble).
从汽缸体上卸去曲轴（参看“汽缸体－拆卸”）。
3.
CYLINDER BLOCK COOLANT DRAIN PLUG
汽缸体冷却剂放油旋塞
4.
Remove the water pump from the cylinder block.
从汽缸体上拆去水泵。
5.
Remove the engine cylinder head from the cylinder block (refer to cylinder head removal in this section).
从汽缸体拆下引擎汽缸盖（请参阅本部分之汽缸盖拆卸）。
6.
RESEARCH ON COMPLEX FOUNDRY TECHNIQUE OF HIGH STRENGTH GRAY IRON FOR CYLINDER BODY & ITS CAP
汽缸体、汽缸盖用高强度灰铸铁的综合铸造技术
7.
Slide the one-piece gasket over the dowels and onto the block.
将单片垫圈沿定位销滑动到汽缸体上
8.
Design and Exploitation for Controlling-online System of 06A Cylinder Block Sand-hole Objection
06A汽缸体砂眼缺陷在线控制系统的设计开发
9.
Design and Optimization of Gating System for Cylinder Block Based on Numerical Simulation
基于数值模拟的汽缸体浇注系统的设计与优化
10.
Influences of Die Casting Parameters on the Porosity in Aluminum Alloy Air-conditioning Compressor Cylinder
压铸工艺参数对铝合金汽缸体孔隙率的影响
11.
Quality Optimization of Cylinder Bore Surfaces for TJ376Q Gasoline Engines;
TJ376Q汽油机气缸体缸孔加工质量优化
12.
only the cylinder block remains and even that is modified
仅仅留下汽缸缸体,而且那也做过了改装
13.
Foundry Quality Improvement for Aluminum Alloy Cylinder Block and Head of KV6 Engine
KV6汽车发动机铝合金缸体缸盖铸造质量改善
14.
The temperature of the gas rises. In the issue it expands in the cylinder.
气体的温度升高，因而它在汽缸里膨胀。
15.
The Establishment and Realization of f Graphic Base for Analysis of Car Cylinder Body Casting Defects
汽车缸体铸件缺陷分析图形库的实现
16.
Market Analysis of FAW Medium & Heavy Cylinder Block Project;
一汽中重型缸体铸件项目的市场分析
17.
An eight-cylinder engine or motor vehicle.
八汽缸发动机或八汽缸汽车
18.
EEB 5L Six Cylinder SOHC Gasoline
EEB5L六缸SOHC汽油