1.
Singular behaviors near crack border in a piezoceramics cylinder with a surface cut;
携表面割痕的压电陶瓷柱体裂纹前缘奇异行为
2.
General Weight Function and Finite Variation for Determination SIF Distribution History Along 3-D Crack Fronts
求解三维裂纹前缘SIF分布时间历程的通用权函数法和有限变分法
3.
FINITE ELEMENT RESEARCH ON STRESS INTENSITY FACTORS AT THE FRONT OF SURFACE CRACK OF HOLLOW AXLES
空心车轴表面裂纹前缘应力强度因子的有限元研究
4.
Effect of Triaxial Stress on the Plastic Zone Distribution in Front of Crack Tip with Mixed Mode Loading
三轴应力状态下复合型裂纹尖端前缘的塑性区分布
5.
Research on Crack Detection of Porcelain Insulators Based on Image Edge Detection;
基于边缘检测的绝缘子裂纹诊断研究
6.
The crack surfaces in the web and flange were subjected to visual examination in order to evaluate crack growth regions.
为了估计各裂纹扩展区，对翼缘和腹板的裂纹表面进行了宏观检验。
7.
Crazing is the invariable precursor of brittle fracture.
出现小裂纹必然是脆性断裂的前兆。
8.
Three structures have exhibited cracking at the ends of flange gusset plates.
已有三个结构在翼缘节点板端部出现了裂纹。
9.
Application of Neural Network to Insulator Cracks Detection in the Power System;
神经网络在电力系统绝缘子裂纹检测中的应用
10.
Recognition of Insulator Crack Types Based on Neural Network and the Invariant Moment;
基于神经网络和不变矩的绝缘子裂纹类型识别
11.
The effects of trailing edge jets on the vortex breakdown location over a delta wing
三角翼后缘喷流对前缘涡破裂位置的影响
12.
The portions of the crack near the saw cut and along the edges are closed in relation to the center of the crack face.
接近锯切口和沿着边缘的裂纹部分相对于裂纹面中心而肯定是闭合的。
13.
Crack propagation from the flameout edge can be modeled by considering an edge crack in the martensite surface from flame cutting.
裂纹从烧割边缘的扩展可模拟为一个从烧割处的马氏体表面起始的边裂纹。
14.
Cracks have been found in the flange and web splices at groove welds in at least four bridges.
至少在四座桥梁的翼缘板和腹板拼接坡口焊缝中发现了裂纹。
15.
By using linear elastic theory, formulae for tangential stress on ellipse edge are derived.
根据线弹性理论,导出了椭圆裂纹边缘的切向应力的表达式。
16.
Singular Integral Equation Approach for Multiple-edge Crack Problems of Half-plane in Antiplane Elasticity;
反平面弹性中半平面多边缘裂纹问题的奇异积分方程解法
17.
Look for obvious splits in windscreen and rear wiper blades.
检查前、后风挡玻璃上的雨刷是否存在裂纹。
18.
These cracks occurred at either the beam flange or in the column flange depending on the reentrant corner weld angle.
这些裂纹视凹形焊角的不同，或者出现在横梁翼缘上，或者出现在立柱翼缘上。