1.
Numerical Simulation of Microcrack Toughening in Particulate Composite
颗粒复合材料微裂纹增韧的数值模拟
2.
The morphology of crack propagation indicate that there is the toughening mechanism of whisker's pull- out and crack deflection.
裂纹进展形态表明,存在晶须拔出及裂纹偏转增韧机制。
3.
It suggests a mechanisms of inforcement for the composites based on the formation and development of cracks within the materials.
根据硝胺发射药受冲击时材料内部裂纹形成和扩展方式，分析研究了硝胺微粒的增韧机理。
4.
AN APPROCH TO THE RELATIONSHIP BETWEEN THE FRACTURE TOUGHNESS OF NOTCH AND THE FRACTURE TOUGHNESS OF CRACK
切口断裂韧性与裂纹断裂韧性之间关系的探讨
5.
The fine grains, crack deflexion and grain-bridging are main toughening mechanisms of silicon carbide ceramic.
细晶、裂纹偏转和晶粒桥联是碳化硅陶瓷的主要增韧机制。
6.
Crack Initiation Toughness and Crack Propagation Toughness of PA6/POE-g-MAH Blends in Notched Impact Tests
PA6/POE-g-MAH共混物缺口冲击的裂纹萌生韧性及裂纹扩展韧性
7.
FRACTURE TOUGHNESS MEASUREMENT OF ROCK WITH FRACTAL CRACKS USING HYDRAULIC FRACTURING
水力致裂法测定分形裂纹下岩石的断裂韧性
8.
Standard test method for surface-crack fracture toughness Kle of metallic plates
GB/T7732-1987金属板材表面裂纹断裂韧度Kle试验方法
9.
CRACK-TIP FRACTURE STRESS UNDER GENERAL YIELDING OF LIGAMENT
韧带全面屈服之后的裂纹顶端断裂应力
10.
FRACTURE TOUGHNESS MEASUREMENT OF CAST MAGNESIUM ALLOY BY CYLINDRICAL SPECIMEN WITH RING-SHAPED CRACK
用环状裂纹圆柱试样测定铸镁合金的断裂韧度
11.
Hard-chromed piston rod with micro-grooves, increasing the rigidity and reducing friction, keep better lubrication action.
活塞杆微裂纹镀硬铬，增因硬度减少磨擦，保持油膜润滑效果值。
12.
Freliminary Investigation of Microcracks in Laboratory Prepared Columnar Ice during Ductile-Brittle Transition
人造柱状冰韧脆转变区裂纹的初步研究
13.
Natural Bio-photonic Structure in the Ligament of Marcia Hiantina
裂纹格特蛤韧带中的天然生物光子结构
14.
SIZE EFFECT FOR ROCK DYNAMIC FRACTURE TOUGHNESS TESTED WITH CRACKED STRAIGHT THROUGH FLATTENED BRAZILIAN DISC
用中心直裂纹平台巴西圆盘测试岩石动态断裂韧度的尺寸效应
15.
The Study of Microwave Joint Interface of ZrO_2 Toughened Ceramic
ZrO_2增韧陶瓷微波连接界面研究
16.
The strain field ahead of a stationary crack tip with plane stress deformation in ductile metal was measured with SEM, by micro grid method and digital image processing.
用显微网格数字图系处理方法，测量了韧性材料平面应力条件下互型单边裂纹尖端附近的应变场。
17.
Study of the Strengthening Mechanism and Fracture Toughness of Steel Fiber Reinforced Concrete;
钢纤维混凝土的增强机理及断裂韧性的研究
18.
Numerical study on the mode Ⅰ fracture toughness of Z-pin reinforced laminates
Z-pin增强复合材料Ⅰ型断裂韧性数值分析