1.
Research on Initial Deformation Limit Index for Long-span Passenger Dedicated Railway Ballastless Track Bridge
客运专线大跨度无碴轨道桥梁初始变形限值研究
2.
Effect of Initial Deformed Microstructures on the Mechanical Properties of Ultrafine Microduplex Structures of Hypereutectoid Steel
初始变形组织对过共析钢超细化复相组织力学性能的影响
3.
The initial stress or deformation fields are not usually homogeneous.
初始胁强场或初始形变场通常并不是均匀的。
4.
test method to prove the resistance to initial ring deflection
检验初始环状变形可能性的方法
5.
Experimental Investigations on Initial Deformation Behaviors of Single Crystal Copper in Nanoindentation;
单晶铜纳米压痕初始塑性变形行为实验研究
6.
INFLUENCE OF STRENGTH PARAMETERS ON OVERALL DEFORMATIONS OF ROCK SPECIMENS WITH INITIALLY RANDOM MATERIAL IMPERFECTIONS
强度参数对初始随机缺陷岩样全部变形的影响
7.
Elastic deformation is nonpermanent, which means that when the applied load is released, the piece returns to its original shape.
弹性形变是非永久性的，即撤去加载后，样品可恢复初始的形状。
8.
Effect of crystal orientation on the deformation behavior of the magnesium alloy AZ31 during plane strain compression
平面应变压缩过程中初始取向对AZ31镁合金变形行为的影响(英文)
9.
THE THERMORHEOLOGICAL FRACTURE RESEARCH ON THE FORMATION OF INITIAL SURFACE CRACKS AT THE SINGLE BUTTRSS DIAMOND DAM
单支墩大头坝初始表面裂纹形成的热流变断裂学研究(英文)
10.
Study on Initial Residual Stresses and Their Effects on Milling Distortion for Thick Aero-Aluminum-Alloy Plate;
航空铝合金厚板初始残余应力及其对铣削变形影响的基础研究
11.
Cannot Initialize local variables
不能初始化局部变量
12.
Cannot Initialize multiple variables
不能初始化多个变量
13.
In Chapter three the simplex method is developed in detail, and in Chapter four the initiation of the simplex method by the use of artificial variables and the problem of degeneracy are discussed.
在第三章详细建立单纯形法，在第四章介绍利用人工变量法初始化单纯形法并讨论了退化问题。
14.
little evolved from or characteristic of an earlier ancestral type.
在初期原始形式上很少再有发展的，或者具有初期原始形式的特点。
15.
Original Settlement and Early Cities of China-Structure, pattern and their controlling factors;
原始聚落与初始城市——结构、形态及其内制因素
16.
First, the distance transformation is performed. Then the initial path is obtained by computing the eigenvalues and eigenvectors of the Hessian matrix.
在距离变换的基础上,先利用Hessian矩阵的几何意义找出中心线的大致形状作为初始路径;
17.
This approach provides an invaluable tool in investigating whether or not a given initial deformation is stable.
这种处理方式提供了一种不可估价的工具，来考察所给的初始形变是不是稳定的。
18.
Parameters of contact layer are determined when deformation of contact layer is equal to initial gap which is proposed in the criterion of penstock.
另外，接触层参数可通过其变形与规范建议的初始缝隙相匹配的原则加以确定。