1.
The property of NFR-W665 extro-low hard rubber-roller and its production practice
NFR-W665型超低硬度胶辊性能及生产实践
2.
Application of Spinning Conventional Combed Yarn of Fine Count with Cots plus Aprons with Less Rigidity
应用低硬度胶辊、胶圈纺普梳细号纱的质量分析
3.
My View on Rigidity of Cots and Granulation on Spinning Quality
胶辊硬度、表面粗糙度与纺纱质量的关系
4.
My View upon the Cot Inserting Allowance on Hardness and Surface Roughness of Cots
胶辊套差与硬度和表面粗糙度关系的探讨
5.
Heating Rollers are made of special silicon, perfect hardness, assure film surface.
· 压膜辊由特殊硅胶做成，适中硬度，压膜板面均匀牢固。
6.
testing method for stiffness of vulcanized rubber at low temperture
硫化橡胶的低温硬挺度试验方法
7.
Method of Shore hardness testing for mill rolls
GB/T13313-1991轧辊肖氏硬度试验方法
8.
Anilox roller gluses quantificationally and glue evening device after coating, glue circulation system.
高精度网纹辊式涂布系统及横向刮装置，匀胶辊，胶剂循环使用。
9.
My Tentative View of Three Factors of Cots on Spinning Quality
浅析胶辊“三度”对纺纱质量的影响
10.
Adhesives--Determination of peel resistance of high-strength adhesive bonds--Floating roller method
GB/T7122-1996高强度胶粘剂剥离强度的测定浮辊法
11.
testing methods for irhd for vulcanized rubbers
橡胶国际硬度试验方法
12.
Investigation on Hardness of Metal Matrix to Composite-alloy Grinding Roller of Wearing Resistance;
基体金属硬度与工艺对复合辊套耐磨性的研究
13.
Structure and Hardness of High C-Cr Roller Steel Treated by Laser Melting
激光熔凝处理高碳高铬轧辊钢的组织及硬度
14.
My Tentative View on the Effect of Surface Uneveness of Cots on Spinnging Quality
浅析胶辊表面粗糙度不匀对纺纱质量的影响
15.
Effects of laser surface hardening on microstructure and hardness of high Ni-Cr indefinite chill cast iron roll
激光表面强化对高Ni-Cr无限冷硬铸铁轧辊组织与硬度的影响
16.
Hardness was decreased after maximum by high temperature heating.
高温加热硬度达最大硬度以后保温硬度降低。
17.
Mold base to be minimum hardness of165 BHN.
（2） 模座的最低硬度为165布氏硬度。
18.
Mold base to be minimum hardness of 165 BHN.
模座的最低硬度为165布氏硬度。