1.
integral lubricating oil sump
内装式润滑油油底壳
2.
Fill the oil pan with oil to the specified level.
用油填充油底壳到规定油面。
3.
F.O./D.O./L.O.+ transferred to + daily service tk./settling tk./sump tk.
将燃油/柴油/机油驳到日用油柜/沉淀柜/油底壳。
4.
Oil pan timing case cover seal
油底壳与正时齿轮盖油封
5.
Automatic Welding of YC4E Diesel Enginge’s Oil Tank
YC 4E类柴油机油底壳的自动化焊接
6.
Loosen oil pan bolts and remove the front bolt at each side.
松动油底壳螺栓，拆下每一面的前螺栓。
7.
Quality problems in sheet forming for 135 diesel oil pan and solution to them
135油底壳冲压成形质量问题及其解决
8.
Study on Radiated Acoustic Field of Oil Pan by Liquid-Solid Coupled
用液固耦合方法研究柴油机油底壳辐射声场
9.
The Dynamic Characteristic Analyses and Mending Design of the 4120S Diesel Sump;
4120S柴油机油底壳动态特性研究及改进设计
10.
Reasons Analysis of the Trouble-diesel Leaking into Oil Pan in BF8L413F Engine
某型号用BF8L413F发动机柴油进油底壳故障原因分析
11.
"In the splash lubricating system, oil is splashed up from the oil pan or oil trays in the lower part of the crankcase."
在飞溅润滑系统中,油从机体下部的油盘或油底壳中飞溅上来。
12.
Liquid-solid Coupled Simulation by FEM/BEM of the Radiant Acoustic Noise of Oil Pan;
油底壳辐射噪声的FEM/BEM液固耦合仿真研究
13.
Bearing Vibration Noise Pan Drain Plug Welding
减振降噪复合板油底壳螺塞支座的焊接
14.
Structure Improvement of Oil Sump Based on Structural Sensitivity Analysis
基于结构刚度灵敏度分析的油底壳结构改进
15.
Gasoline vapor also condenses on cold engine parts and drips down into oil pan.
汽油蒸气会凝结在冷的发动机零件上，然后流入油底壳。
16.
The Application of Perforation Plate in Reducing Oil Sump Noise of Some 6-cylinder Diesel Engine
穿孔板在降低某6缸柴油机油底壳噪声中的应用
17.
The oil pump in the lubricating system draws oil from the oil pan and sends it to all working parts in the engine.
润滑系统中的机油泵从油底壳抽取油并把油输送到发动机内全部正在工作的部分。
18.
"For example, the oil pan is removed and cleaned during such engine-overhaul jobs as replacing bearings or rings."
例如,在进行更换轴承或活塞环这样的大修期间,可将油底壳卸掉,进行清洁工作。