1.
Study on Nozzle Wear Mechanism and Drilling Test of Swirling Abrasive Water Jet;
旋转磨料射流喷嘴磨损机理与钻孔试验研究
2.
Influence of Entrance Shrinking Angle on Nozzle Wear in Swirling Abrasive Water Jet
入口收缩角对旋转磨料射流喷嘴磨损的影响
3.
Research on new style anti-impacting fan-shaped nozzle
新型抗冲击磨损扇形喷嘴的设计研究
4.
Research on Erosion Wear Mechanisms of Ceramic Sandblasting Nozzles Using FEA Methods;
基于有限元法的陶瓷喷砂嘴冲蚀磨损机理研究
5.
The Analysis and Improvement on the Wearing of the Burner Nozzle of Mitsubishi 700 MW Unit Boiler
三菱700MW机组锅炉燃烧器喷嘴的磨损分析及改进
6.
Development of New Ceramic Nozzles and Study on Its Erosion Wear Mechanisms;
新型陶瓷喷砂嘴的研究开发及其冲蚀磨损机理研究
7.
Structural Design of Symmetric Laminated Ceramic Nozzle and Study on it's Erosion Behavior
对称型叠层陶瓷喷嘴的结构设计及其冲蚀磨损行为研究
8.
The wear test was carried on a nozzle which was made from carbides and ceramics on high pressure abrasive water-jet machine.
本文采用硬质合金和陶瓷材料制成喷嘴,在高压水设备上进行了磨损实验研究。
9.
Due to the high concentration and high viscosity of the CWS, bad atomizing properties and bad wearproof ability are much serious problems all along.
水煤浆浓度高、粘度大，雾化困难和磨损严重是水煤浆喷嘴需要克服的两个难题。
10.
The Technology of Numerical Control Reconstruction on the Injection Nozzle Center Hole and Inner Cone Grinder;
喷油嘴中孔座面磨床的数控改造技术
11.
ISA 1932 nozzle
ISA 1932喷嘴
12.
Experimental Study of Hydrajet Nozzle on Abrasion
水力喷砂射孔压裂喷嘴的损伤试验与分析
13.
Analysis on Energy-saving Performance of Rotary Throttle Reformation of MPS-89N Pulverizer
MPS-89N磨煤机旋转喷嘴改造节能性能分析
14.
Flow field simulation and experiment of pre-mixed abrasive water jets outside the nozzle
前混合式磨料水射流喷嘴外流场仿真与实验
15.
Fully accelerating abrasive particle velocity to near water-jet velocity is main aid of nozzle design.
喷嘴设计的主要任务就是要使从喷嘴喷出的磨料粒子得到充分加速,以便接近水射流的速度.
16.
Study on Abrasive Resistance of Haystellite7 Alloy Coating Prepared by Flame Remelting
火焰喷熔Haystellite7合金涂层耐磨粒磨损性能研究
17.
The nozzle is fitted with a protective sleeve which can be replaced when it is worn.
喷咀上装有保护套，磨损后可以更换。
18.
A Mathematical Model to Predict the Erosion of BF Tuyere Due to the Pulverized Coal Injection
煤粉喷吹使高炉风口磨损的预测模型