1.
The Study of the Hydro-Mechanism Composite Transmission Device Base on Rod-Less Piston Hydraulic Cylinder;
基于无杆活塞缸的液压—机械复合传动装置研究
2.
double-acting single piston rod oil cylinder
双作用单活塞杆式油缸
3.
double-acting double piston rod oil cylinder
双作用双活塞杆式油缸
4.
helical spline type actuator
带螺旋活塞杆的液压缸
5.
Structural Analysis for Piston-Piston Rod Sets of Steering Cylinder of Shearer
采煤机调高油缸活塞-活塞杆组件的结构分析
6.
Two-point Floating Pneumatic Clamping Device of Toggle-lever Force-amplifer Based on Fixed Cylinder with Double Piston
基于双活塞固定气缸的铰杆-杠杆增力双点浮动夹紧装置
7.
With this type of skirt excellent matches between skirt and liner can he achieved and piston scraping eliminated.
该型活塞裙部与气缸套贴合良好，无拉缸擦伤现象。
8.
Bang! There is an explosion in the cylinder. The explosion pushes the piston down. The piston is attached to a rod. The rod is attached to the crankshaft of the car.
砰!汽缸内产生爆炸，把活塞向下推动，活塞连着连杆，连杆又连着汽车曲轴。
9.
The Study on the Organization and the Performance of Plasma Arc Quenched Layer of Materials Commonly Used in Piston Rod and the Cylinder Sleeve;
活塞杆及缸套常用材料等离子弧淬火层组织及性能研究
10.
Analysis of Lateral Thrust on Main Cylinder Rod of Hydraulic Swing Beam Shear on the Basis of Finite Element Analysis
液压摆式剪板机主油缸活塞杆侧推力有限元分析
11.
Cause Analysis and Improving Measures for Rod lost steady in Hydraulic Cylinders
装载机液压缸活塞杆失稳原因综合分析及改进措施
12.
When discharging, the motor operates, hydraulic cylinder charges pressure, push rod (piston rod) draw back, the valve plate connected with push rod opens, the materials are discharged.
当需要卸料时，电机运转，液压缸增压，推杆（活塞杆）收回，和推杆连接的阀板开启，物料卸下。
13.
This paper analyses the differential control circuit of hydraulic pressure cylinder and its parameter, and works out the ratio of piston and the diameter of piston pole according to the requirement of speed rate.
分析了液压缸差动控制回路的型式和参数，并按速比条件导出了活塞与活塞杆直径的比值关系。
14.
"The cylinder of a steam engine is closed by plates at Both ends, with provision for the piston rod, which is rigidly attached to the piston, to pass through one of the end cover plates."
蒸汽机的汽缸两端都用盖封住,使得与活塞刚性连接的活塞杆穿过盖的一端。
15.
hoel of piston crown
(制动主缸内) 活塞出油孔
16.
piston to head clearance
活塞底和气缸头间隙
17.
slave cylinder piston return spring
工作缸活塞回位弹簧
18.
ring gap in bore
汽缸内活塞环切口间隙