1.
Analysis of Crack Tip Plastic Zone for Composites under Small Scale Yielding
小范围屈服条件下复合材料裂纹尖端塑性区分析
2.
Boundary Analysis of Tunnel Plastic Zone Based on Mathematical Statistics
基于数理统计的巷道塑性区边界分析
3.
Shear Capacity of Plastic Hinge Region of RC Shear Wall;
钢筋混凝土剪力墙塑性铰区受剪承载力分析
4.
Research on the Region of High Plastic Clay of High Rockfill Dam;
高心墙堆石坝高塑性粘土区域的影响分析
5.
Time-Histroy Analysis of Frame Structure with Consideration of the Influences of the Plastic Zone Length;
框架结构考虑塑性区长度的静力全过程分析
6.
Calculation and Analysis of Plastic Area and Ground Settlement for Shield Tunnel
盾构隧道拱顶塑性区及地表沉降分析与计算
7.
plastic analysis of metal forming
金属成形的塑性分析
8.
elasto-plastic matrix displacement analysis
弹塑性矩阵位移分析
9.
Based upon the near crack-tip elastic analysis, estimates of the size and shape of the plastic zone will be developed.
根据裂纹尖端附近的弹性分析，来研究塑性区的形状和大小的计算。
10.
Elastic-Plastic FEM Analysis on Flexible Retaining and Protection Structures of Deep Excavation in Loess Region;
黄土地区深基坑柔性支护结构弹塑性有限元分析
11.
Effects of Several Factors on Plastic Zone at the Cracking Tip of Welded Joint with FEM;
采用有限元分析多因素对焊接接头裂纹尖端塑性区的影响
12.
Test Analysis on the Elastic-Plastic Constitutive Model of Saturated Remodeling Loess
饱和重塑黄土的弹塑性本构模型与试验分析
13.
Elasto-plastic Models and Nonlinear Static Analysis Considering Higher Modes Influence;
弹塑性分析模型及考虑高阶振型影响的静力弹塑性分析方法
14.
Large Deformation Elastic-Plastic Analysis of Soil Stability by Finite Flement Method;
土体稳定性弹塑性大变形有限元分析
15.
Fem Analysis of Elasto-Plastic Large Deformation on Slope Stability;
边坡稳定性弹塑性大变形有限元分析
16.
Market Analysis of TPO and Its Process Technologies;
热塑性聚烯烃弹性体技术及市场分析
17.
Elastic-plastic analysis of Beijing Automobile Museum
北京汽车博物馆抗震性能弹塑性分析
18.
Plastic slip stability analysis of gangue granular media
矸石散体塑性滑移的稳定性评价分析