1.
Research on Numerical Simulation for the Process of Blanking-welding Drive Axle Housing;
冲压焊接式驱动桥壳成形过程数值仿真研究
2.
Research on Hydraulic Design and Application on Stamping and Welding Multistage Pump;
关于冲压焊接多级离心泵水力设计的研究
3.
Optimum Design and CFD Analysis on Stamping and Welding Multistage Stainless-steel Centrifugal Pump's Impellers;
不锈钢冲压焊接多级离心泵叶轮优化设计及CFD分析
4.
Quasi-Unsteady Numerical Simulation of the Impeller-Volute Coupling Characteristics in Stamping-Welding Centrifugal Pump;
冲压焊接离心泵叶轮及蜗壳耦合特性准非定常数值模拟
5.
Study on the Design Methods and Shaping Technologies of the Stamped-welded Centrifugal Pump s Impeller;
冲压焊接离心泵叶轮设计方法和成型工艺的研究
6.
Design Optimization and Computer Simulation on Horizontal Stamping and Welding Multistage Centrifugal Pump
卧式冲压焊接多级离心泵的设计优化及计算机模拟
7.
Theoretical Study on Stamping Formability of Spot Welding Tailored Blanks;
点焊拼接板冲压成形性能的理论分析
8.
Basic knowledge in welding and associate components.
基本焊接与冲压/伸模具的相关部件知识。
9.
Influence of initial stress of thin pressing parts on welding hot cracking susceptivity
薄壁冲压件初始应力对焊接热裂纹敏感性影响
10.
Weld identification single hole punch.
鉴别焊缝的单孔冲压机
11.
The Lacunas and Countermeasures of the Stainless-steel Centrifugal-pump Made by Pressing and Jointing;
冲压不锈钢焊接成型离心泵使用过程中的主要缺陷与对策
12.
Application of pulse submerged arc welding technology in the X80 alloy steel weld
脉冲埋弧焊技术在X80钢焊接中的应用
13.
Resistance microwelding and its step-pulse output
电阻焊显微焊接及其阶梯波输出脉冲
14.
"Welding transformer control operated from 380V,DC,50Hz, three phase. "
焊接变压器,380V,DC,50HZ,三相
15.
The Quality Control of Pressure Vessel to Take Over the Welding Process of Welding
压力容器接管焊接过程中焊接质量的控制
16.
Study of Stamping Formability of Laser Welded Blanks and the Optimization of Weld-line Location;
激光拼焊板的冲压成形性分析及焊缝位置优化
17.
Magnesium Alloy Welding Wires Prepared by Hot-Extruded and Welding Performance;
热挤压法制备镁合金焊丝及其焊接接头分析
18.
CLOSE LOOP CONTROL OF WELD PENETRATION IN PULSE PLASMA ARC WELDING
脉冲等离子弧焊接焊透质量的闭环控制