1.
Research and Analysis of 18-8 Stainless Steel Heat Exchanger Crack Failure
18-8不锈钢换热器裂纹失效研究与分析
2.
Failure Analysis of Cracking of Expansion Joint of Incoloy 800 Bellows
Incoloy 800波纹管膨胀节开裂失效分析
3.
Longitudinal-cracking Failure Analysis of Box
φ139.7mm钻杆内螺纹接头纵向开裂失效分析
4.
Penetrant Testing Tests and Failure Failure Aanalysis of Cast Stainless Steel Elbow
铸造不锈钢弯头裂纹检测及失效分析
5.
Elastic-Plasticity Analysis of Ⅰ/Ⅱ Mixed Mode Crack and Probability Caculation of Fracture Failure
Ⅰ-Ⅱ型裂纹的弹塑性分析及断裂失效概率计算
6.
Failture Analysis of Drilling Collar Thread Connections and Structure Optimization
钻铤连接螺纹断裂失效分析及结构优化
7.
Failure Pressure Analysis of SG Tube with Axial Crack
蒸汽发生器含轴向裂纹传热管的失效压力分析
8.
FAILURE ANALYSIS OF BELLOW EXPANSION JOINT IN HYDROCRACKING UNIT
加氢裂化装置中波纹管膨胀节失效分析
9.
The endurance crack is apt to be produced in collar thread during drilling, which eventually results in the connection failure.
在钻井过程中,钻铤螺纹容易产生疲劳裂纹,最终导致连接失效。
10.
crackling effect
裂纹效应,龟裂效应,冰花效应;皱纹[涂层]整理
11.
It was concluded that failure of double clip reed was the result of local stress concentration and cracking at the sharp elbow of reed.
双卡簧片成形时弯角较尖锐并有明显裂纹是导致失效的原因。
12.
The Analysis of Fracture Axis Pin Made of 18Cr2Ni4WA Steel;
18Cr2Ni4WA钢销轴断裂失效分析
13.
Crack Failure Analysis on Oil Sucker Rods of 20CrMoA Steel
抽油杆20CrMoA断裂失效分析
14.
Failure Analysis of 30Cr2Ni2Mo Rod
30Cr2Ni2Mo拉杆断裂失效分析
15.
Influence of Ce on Crack Closure Effect and Intrinsic Fatigve CrackGrowth Resistance In Al-Li Alloy
铈对铝锂合金裂纹闭合效应及本征疲劳裂纹扩展抗力的影响
16.
EFFECTIVE MODULI OF AN ELASTIC SOLID WEAKENED BY A PARALLEL ARRAY OF MICROCRACKS
平行微裂纹削弱的弹性体的各向异性有效性能与双周期裂纹模型
17.
Numerical Analysis of Constraint Effect on Crack-Tip and Its Application;
裂纹尖端约束效应的数值分析及应用
18.
Numerical Studies on the Crack Closure Effect in Fatigue Crack Propagation;
疲劳裂纹闭合效应数值模拟方法研究