1.
Study on extrusion and exhaust process of monopropellant pulse thruster
单组元脉冲推力器挤压和排气过程分析
2.
This action could open an inlet valve for an intake stroke, or open an exhaust valve for an exhaust stroke.
这过程能使进气门在进气行程打开，或者排气门在排气行程打开。
3.
The Waste Ammonia Emission and Heat Energy Reutilization during the Nitriding
渗氮过程中废氨气排放及热能再利用
4.
Numerical study of process and emissions characteristics of natural gas reburning
天然气再燃过程与排放特性数值研究
5.
Analysis of Exhaust Defects Based on the Casting Solidification Process
基于铸件凝固过程的排气管缺陷分析
6.
"A fresh air-fuel charge enters through the intake port, and the Burned gases exit through the exhaust port. The complete cycle of operation is as follows."
新的可燃混合气通过进气口进入,燃烧过的废气从排气口排出．整个工作过程如下:
7.
Simulation of the Effects of Exhaust Port EGR on CAI Engine Combustion and Gas Exchange;
排气道EGR对CAI燃烧和换气过程的模拟研究
8.
Numerical Simulation for Working Process of Vehicle Catalytic Converter;
汽车排气后处理装置工作过程数值模拟
9.
Study on the Emission in a SI Engine with Secondary Air during Cold Start;
二次空气对汽油机冷起动过程排放影响的研究
10.
Study on the emission rule of SO_2 in flue gas during sintering
铁矿烧结过程烟气中SO_2的排放规律研究
11.
Research on Process of Greenhouse Gas Emission from Reservoir
水库温室气体排放过程中若干问题的研究
12.
Numerical Simulation of Gas-liquid Jet to the Ballast Water Discharge Pipe Crossflow
气液射入压载水排放管中混合过程的数值模拟
13.
Simulation for the Influence of Exhaust Duct EGR on CAI Combustion
排气道EGR策略对CAI燃烧过程影响的模拟研究
14.
Prediction of aeroengine exhaust gas temperature using process neural network
基于过程神经网络的航空发动机排气温度预测
15.
Process analysis and experiment on tail gas reduction and energy saving for ammonium phosphate production
磷铵尾气减排与节能的过程分析与实验
16.
For the engine particle emission measurement test, exhaust dilution system is mandatory.
在发动机颗粒排放测试过程中,排气稀释系统是必备的设备。
17.
Simulation of the Effects on Gasoline CAI Combustion and Gas Exchange Process Based on Dual Exhaust Valve Opening Strategy
排气门二次开启对汽油可控自燃和换气过程影响的模拟研究
18.
scavenging stroke
扫气[换气]冲程, 清除冲程, 排泄行程