1.
FEM Analysis of Contact Problem for Hybrid Ceramic Angular Contact Ball Bearing
混合陶瓷角接触球轴承接触问题的有限元分析
2.
Finite element analysis on the contact fatigue life of high speed angular contact ball bearings
高速角接触球轴承接触疲劳寿命的有限元分析
3.
Contact Stress Analysis on Large-sized Four-contact-point Ball Bearing with Negative Axial Play
特大型负游隙四点接触球轴承接触应力分析
4.
Improvement of measuring method of contact point groove diameter for double-direction thrust angular contact ball bearing
双向推力角接触球轴承接触点沟径尺寸测量方法的改进
5.
ANSYS-based Contact Analysis of Hybrid Ceramic Ball Bearings and Experiment Research;
基于ANSYS的混合陶瓷球轴承接触分析与试验研究
6.
non-contact sealed ball bearing
非接触式密封球轴承
7.
Four pionts angle contact ball bearing is separable bearing,it can be subject to bi-directional load and have the function of both single row and double rows bearings.
四点接触球轴承为可分离型轴承，可承受双向轴向载荷，并有单列和双列角接触球轴承的功能。
8.
Rolling bearings--Angular contact ball bearings--Boundary dimensions
GB/T292-1994滚动轴承角接触球轴承外形尺寸
9.
Rolling bearings--Double row angular contact ball bearings--Boundary dimensions
GB/T296-1994滚动轴承双列角接触球轴承外形尺寸
10.
A geometrical analysis on three point contact ball bearing with two-piece inner ring
双半内圈三点接触球轴承的几何分析
11.
The Heat Generated by High Speed Angular Contact Ball Bearings and its Influence Factors
高速角接触球轴承发热及其影响因素
12.
Contact simulation on thrust ball bearing based on ANSYS
基于ANSYS的推力球轴承的接触仿真
13.
Analysis on the Dynamic Parameters of Ceramic Angular Contact Ball Bearings
陶瓷角接触球轴承动态特性参数分析
14.
Optimized combination method for double inner ring ball bearinig with large contact angle
双内圈角接触球轴承的优化组配方法
15.
The double direction angular contact thrust ball bearings are suitable for machine tool spindles , while the single are used to support ball screws .
双向推力角接触球轴承适用于机床主轴，单向推力角接触球轴承适用于丝杠支承。
16.
Axial load-deformation curve and preload on angular con act ball bearings
角接触球轴承的轴向载荷—变形曲线和预紧
17.
Selection and fit of compound clearance of angular contact ball bearing with double inner rings
双内圈角接触球轴承轴向和径向游隙的选配
18.
"In Ball Bearings and roller Bearings, the surfaces are separated by Balls or rollers. "
在球轴承和滚柱轴承中,接触面之间有球或滚柱隔开。