1.
Optimization of Process Parameters for Surface Parts Stamp Forming;
曲面冲压件成形工艺参数的优化研究
2.
The Theoretic Research and Optimization of Surface Parts Stamp Forming;
曲面零件冲压成形的理论研究与优化
3.
Research and Development on Sheet Metal Bending Parts CAPP System;
冲压弯曲件CAPP系统研究与开发
4.
Study on Surface Generation and Mesh Repair in Die-face Engineering of Sheet Metal Forming;
冲压模面工程中的曲面生成及网格修复技术
5.
Study on Dynamic Buckling of Axial Compression Member under Impact Load
冲击荷载作用下轴心受压构件动力屈曲研究
6.
Dynamic Response of 3D Piezoelectric Circular Bent Rods under Impulsive Loading
圆截面压电曲杆在冲击载荷作用下的动力响应
7.
ANALYSIS ON COMPRESSION PROCESS OF BAMBOO CURVE BY ANSYS PROGRAM
基于ANSYS软件的竹材曲面受压过程分析
8.
Mid- Surface- Based Form Feature Modeling Technology of Stamping Parts
基于中面表示的冲压件特征造型技术
9.
Research on the Turning-forming of Thin and Complicated Contour Surface;
复杂曲面、薄壁件精密旋压成形技术研究
10.
Study on Concrete Compressive Strength Curve of Member Bottom Surface Detected by Rebound Method
回弹法检测构件底面混凝土抗压强度曲线研究
11.
Handle Curved Pressure Distribution Test System Based on LabVIEW Software
基于LabVIEW软件的手柄曲面压力分布测试系统
12.
Application of M-N correlation curves to the calculation of a section of lightweight aggregate concrete circular section members under eccentric loads
M-N相关曲线用于轻骨料混凝土圆形截面偏压构件截面的计算
13.
modular pulse converter supercharging
模件式脉冲转换增压
14.
a machine for stamping out engine parts
冲压发动机部件的机器.
15.
The In-Plane Stability Carrying Capacity Analysis of Beam-Columns Considering the Post-Buckling Strength of the Web;
考虑腹板屈曲后强度压弯构件平面内稳定承载力研究
16.
Discussion about"Analysis of Correlation Curves between the Axial Force of Eccentrically Pressed Member with Rectangular Cross Section and the Bending Force Moment;
关于“矩形截面偏心受压构件轴力——弯矩相关曲线分析”的探讨
17.
The Carrying Capacity Analysis of Axially Compressed Welded Section Steel Members Undergoing Buckling Interaction
屈曲相关作用下焊接截面轴心受压构件的承载力研究
18.
Optimization of conditions to process cooked chicken breast by ultra-high pressure using response surface methodology
响应曲面法优化超高压处理熟制鸡肉条件的研究