1.
Simple and accurate settings of cutting depth and free settings for back stroke of pressure plate to reduve the idle motion and improve working efficiency.
裁力深度设定简单、准确、压板回程可任意设定，减少空行程，提高工效。
2.
Regulations to compile the documents of municipal engineering design
市政工程设计文件编制深度规定
3.
Regulations to compile the documents of architectural engineering design
建筑工程设计文件编制深度规定
4.
Specification for derails of engineering design of instrumentation
自控专业工程设计文件深度的规定
5.
Sets the depth of the 3-D effect on the selected object to 72 points (or 1 inch)
将所定对象的三维效果深度设为72磅(或1英寸)。
6.
Unified specification on contents and procedure of detail design DWN industrial furnaces for chemical plants
化工工厂工业炉设计施工图内容深度统一规定
7.
Study on Theory of Designing and Measuring Embedment Length of Free Segment of Cable
锚索自由段嵌固深度设计和确定的理论研究
8.
Specification of contents and procedure on heating,ventilating and air conditioning detailed desigh for chemical plantCD70A1-82
化工采暖通风与空气调节详细设计内容和深度的规定
9.
The process design specification of the detail design content and procedure for chemical bulk material handing
化工机械化运输工艺设计施工图内容和深度规定
10.
The Z axis is provided with zero output to facilitate the setting and changing of electrical charging depth if installed with optical ruler.
若加装光学尺Z轴具有零点输出功能放电深度的设定及变更容易。
11.
too deep to determine the depth of.
太深，以至不能测定其深度。
12.
Analysis and Application of Depth Control Error During Torpedo Turn at Required Depth
鱼雷定深旋回时深度误差分析及应用
13.
"For wet-pit installations, it is recommended that the low water level elevation be specified to meet or exceed the minimum submergence to prevent vortexing."
对于湿井设备安装,建议所确定的低水位高度应该达到或超过预防涡流的最小潜水深度。
14.
Countertop. Cabinet length and depth can be specified.
台面。可指定橱柜的长度和深度。
15.
Determine baseline rate, rhythm, and depth of breathing.
测定基线呼吸速度、节律和深度。
16.
Analysis of Accuracy for Passive Estimation of Target Depth in Deep Sea Based on Vertical Linear Array
基于垂直线列阵的深海被动目标定深精度分析
17.
Casing failure mechanism and strength design considerations for deep and ultra-deep wells
深井超深井套管损坏机理与强度设计考虑因素
18.
Design of buried depth for vertical ground heat exchangers based on the energy efficiency degree
基于换热能效度的竖直地埋管埋设深度设计