1.
" Marine steel pipe flanges, fillet weld-on"
GB/T2506-1989船用搭焊钢法兰(四进位)
2.
" Marine combination pipe flanges, slip-on steel outer flanges, fillet weld-on steel inner flanges"
GB/T2508-1989船用搭焊钢环松套钢法兰(四进位)
3.
Analysis of Static Strength for Overlap Joint Plates and Others;
搭接焊接头搭板的静强度分析及其它
4.
Study of Length Calculation of Three Side Welded Lap;
三面围焊搭接角焊缝长度计算的探讨
5.
Overlapping Model of Sequential Bead Based on GMAW Formation
基于GMAW堆焊成形的顺序焊道搭接量模型
6.
Static Analysis for Weld-Bonded Single-Lap Shear Joint with Multiple Weldspots
多焊点情况下胶焊单搭接头的静力分析
7.
Welding Quality Thermal Control System With Resistance Welder for Narrow Lap Welding
窄搭接电阻焊机的焊接质量热态控制系统
8.
LAP ARGON ARC WELDING TECHNOLOGY OF THE TITANIUM - ALLOY TUBE
钛合金管路连接件的搭接氩弧焊工艺
9.
Research on Strength of Welds in Overlaped RHS K(N)-joints;
矩形管K（N）型搭接节点焊缝计算研究
10.
The Study of Lap Welding Based on Mobile Robot with Rotating Arc Sensor
移动机器人旋转电弧传感搭接焊研究
11.
"The welder is 1650MM 270kva,hydraulically and pneumatically operated C-Flat Narrow Lap Seam Welder with joint planisher. "
焊机是1650mm270KVA,液压和气动操作的C型-板材窄搭接碾压缝焊机。
12.
By means of multi layer and multi pass lap surfacing, the surfacing layer with big thickness and area can be acquired.
采用多层焊和多道搭接工艺可获得大厚度、大面积堆焊层。
13.
Study on the Microstructure and Properties of Friction StirWelded Lap Joints of Aluminum Alloy
铝合金搅拌摩擦焊搭接接头焊缝组织及性能研究
14.
Research on Penetration Adaptive Control Technology for Lap Weld of Missile Shell
导弹壳体搭接焊缝的熔深适应控制技术研究
15.
Static Behaviour of Overlapped KT-Type SHS Joints;
直接焊接KT型搭接方管节点静力性能的研究
16.
Numerical analysis on stress distribution in adhesive-welded double lap joint of aluminum
铝胶焊双搭接接头上应力分布的数值分析
17.
Study on Laser Welding Process for Stainless Steel Railway Vehicle
铁道客车用SUS301L不锈钢非熔透型激光搭接焊工艺
18.
Effect of interface morphology on mechanical property of FSW lap joints on 2024-T3 Al-alloy thin plank
2024-T3薄板搅拌摩擦焊搭接界面成型及接头性能