1.
piston skirt clearance
(活塞侧缘和气缸之间的余隙) 活塞侧缘隙
2.
"adjusting valve tappet clearances (also called adjusting valve lash), grinding valves and valve seats."
气门维修包括调校气门间隙(也称气门余隙),研磨气门和气门座.
3.
space left clear when one object moves past or under another
净空,余隙,量（一物从另一物旁边或下面经过时,两者间的空隙）
4.
There be not much clearance for tall vehicle pass under this bridge
高大车辆在这桥下通过时没有多大余隙
5.
There is not much clearance for tall vehicle pass under this bridge.
高大车辆在这桥下通过时没有多大余隙。
6.
"The air volume with the piston at TDC is called the clearance volume, since it is the clearance that remains above the piston at TDC."
活塞在上止点时的气体体积称为余隙体积,是活塞在上止点时,活塞上部所剩余的气体容积。
7.
Calculating of Adjusting Clearance between Screw Shapes while Machining Rotors of Screw Pump
螺杆型面加工时侧隙余量的调整计算
8.
Closer/封口板： Panel to fill in gap between two stands, or disguise bland spaces.
填充两个展台之间空隙的嵌板，或装饰多余空隙的镶板。
9.
The AC Permanent Magnetic Synchronous Motor Based on Cosine Inverse Proportional Air Gap
基于余弦反比气隙磁场的交流永磁同步电机
10.
Prediction of the Secondary Porosity Zone of Fuyu Oil Layer in the West of Daqing Placanticline
大庆长垣以西地区扶余油层次生孔隙预测
11.
The Developing Regularities and the Developing Zones Forcasting of Secondary Pore of Fu-Yu Reservoir in Qijiabei Area, Songliao Basin;
松辽盆地齐家北地区扶余油层次生孔隙发育规律及次生孔隙发育带预测
12.
The Relationship between the Clastic Composition and the Pores of Fuyu Oil Reservoir Sandstones in North Qijia Area;
齐家北地区扶余油层储层砂岩碎屑成分与孔隙关系
13.
With the increase ofα0, dynamic strength decreases markedly.
随着α的增大，动强度明显降低，残余孔隙水压力减小，残余应变发展速率加快。
14.
The gap was not narrow as it looked and even Jack got his bulk through with room to spare.
那个空隙并非像它看起来那样狭窄，即使是杰克那么肥胖的身子通过也绰绰有余。
15.
One rail is joined to the next by means of a metal, plate;space is left between them to allow for expansion.
用铁板把铁轨一根一根连接起来，它们中间留出空隙，作为膨胀的余地。
16.
To save storage space by eliminating gaps, empty fields redundancy, or unnecessary data to shorten the length of records or files.
通过删除间隙、空字段、冗余项或不必要的数据以缩短记录或文件的长度来节省存储空间。
17.
The residual strain is the additional shear strain created with the increase of pore pressure due to cyclic shear under initial shear stress.
残余应变是由于周期剪切引起孔隙压力增长,在初始剪力作用下产生的附加的剪应变.
18.
lower high water interva
低高潮间隙低高潮间隙