1.
Microstructure evolution of Ti_3Al based alloy during near isothermal deformation
Ti_3Al基合金在近等温变形过程中的组织变化规律
2.
Research on Semi-Solid Microstructure of the AZ91D Magnesium Alloy Fabricated by Coupled Large Deformation-Isothermalmethod;
大变形—等温耦合制备AZ91D半固态组织研究
3.
Study on Extrusion Process and Deformation Mechanism of Magnesium Alloy Tubes;
镁合金等温挤压工艺及变形机理的研究
4.
The Research on the Isothermal Rheological Forming of the Titanium Alloy Compressor Disk of WZ9 Helicopter;
WZ9直升机钛合金压气机盘等温流变成形研究
5.
Equiaxed Treatment and Hot Deformation of TC11 Titanium Alloy;
TC11钛合金等轴化处理及高温变形行为的研究
6.
Morphology Evolution of A356 Alloy Primary Phase in Solid-liquid Range at Isotherm
A356合金初生相在固液区间等温时形貌演变
7.
Study on the deformation behavior and isothermal extrusion process simulation of AZ80 magnesium alloy
AZ80镁合金塑性变形行为及等温挤压过程仿真
8.
Effect of long-time isotherm after deformation on precipitation in Nb-bearing steel
含Nb钢变形后长时间等温对析出的影响
9.
Effect of Deformation Amount on Isothermal Aging Kinetics of Cu-Cr-Zr Alloy
变形量对Cu-Cr-Zr合金等温时效动力学的影响
10.
Research on A356-Sc Al Alloy’s Evolution of Morphology of Primary Phase in Solid-liquid Phase Region During Isothermal Holding
A356-Sc铝合金在固液相区等温保温时初生相形貌演变的研究
11.
Deformation Character of Non-metallic Inclusions in Powder Superalloy During Isothermal Casting
粉末高温合金等温锻造过程非金属夹杂物的变形特征
12.
MICROSTRUCTURE EVOLUTION OF HYPEREUTECTOID STEELS DURING WARM DEFORMATION Ⅰ.Formation of Equiaxial Ferrite and Effects of Al
过共析钢温变形过程中的组织演变 Ⅰ.铁素体的等轴化及Al的影响
13.
After the high temperature, cooking, block of wood deformation, splits, wrot, grit working procedure such as glorifying, drenching lacquer, the product are durable.
经高温，蒸煮处理，不变形，不开裂，刨光，砂光，淋漆等工序，产品经久耐用。
14.
Using alloy steel,lips mouth casting hard alloys with wear-resisting,withstand high temperatures,resist deformation characteristics.
采用合金磨具钢，唇口浇铸合金，具有耐磨、耐高温，抗变形等特点。
15.
Effects of Isothermal Heat Treatment on Microstructure and Properties of As-extruded Magnesium Alloy;
等温热处理对挤压态变形镁合金组织和性能的影响
16.
Rapid Detection of Proteus by Loop-mediated Isothermal Amplification
环介导等温扩增技术快速检测普通变形杆菌的研究
17.
Mechanical properties of commercial pure titanium processed by ECAP at room temperature using a 120° die
室温Φ=120°等径弯曲通道变形工业纯钛的力学性能
18.
Effects of Isothermal Deformation Parameters on Microstructure and Tensile Property of 15%SiCp/Al Alloy Matrix Composites
等温变形参数对15%SiC颗粒增强铝基复合材料组织性能的影响