1.
Influence of Isothermal Forging Temperature on Microstructure and Mechanical Property of 2A70 Aluminum Alloy
等温锻造温度对2A70铝合金组织性能的影响
2.
Influence of Isothermal Forging Temperature on Microstructure and Mechanical Property of 7050 Aluminum Alloy
等温锻造温度对7050铝合金组织与性能的影响
3.
Study on Soft-sensor Technology and Inferential Control of Temperature in Isothermal Forging;
等温锻造过程中温度软测量技术与推断控制
4.
Study on Optimization of Isothermal Forging Process Parameter of TA15 Titanium Alloy;
TA15钛合金等温锻造工艺参数优化研究
5.
Research and Development of the Control System for an 80MN Isothermal Forging Hydraulic Press;
80MN等温锻造液压机控制系统研制
6.
Development of a Die Material for Iso-thermal Forging at 1100℃
1100℃等温锻造用模具材料的研制
7.
Near-Isothermal Forging Technology of TA15 Titanium Alloy Corbel Piece
TA15钛合金支臂近等温锻造工艺
8.
Study on Isothermal Forging Techniques and After-forging Structure of Superplasticity of Titanium Alloys;
钛合金超塑性等温锻造工艺及锻后组织研究
9.
Numerical Simulation for the Isothermal Forging Processes of Complex Structural Component of Ti-1023 Alloy;
Ti-1023合金复杂结构件等温锻造过程的数值模拟
10.
The Study on Complex Titanium Alloy Components of Engine Isothermal Forging Deformation;
发动机钛合金复杂结构件等温锻造研究
11.
Numerical simulation and experiment of isothermal forgings process of TC4 titanium alloy
TC4钛合金等温锻造过程的数值模拟和实验研究
12.
Effect of Isothermal Forging on Distribution of Particles of SiC_p/Al Composites
等温锻造对SiC_p/Al复合材料颗粒分布的影响
13.
Effects of Isothermal-forging on Microstructure and Properties of TC6 Titanium Alloy
等温锻造对TC6钛合金组织和性能的影响
14.
Microstructures and Properties of TC17 Powder Metallurgy Titanium Alloy Prepared by Laser Sintering/Isothermal Forging
激光烧结/等温锻造TC17粉末钛合金的组织与性能
15.
Effect of Strain Rate on Microstructure and Properties of Ti60 Alloy Under Isothermal Forging
等温锻造应变速率对Ti60合金组织和性能的影响
16.
Simulation of Isothermal Forging for Superalloy and Analysis of Thermal Load on Die;
粉末高温合金盘件等温锻造模拟及模具热负荷分析
17.
Deformation Character of Non-metallic Inclusions in Powder Superalloy During Isothermal Casting
粉末高温合金等温锻造过程非金属夹杂物的变形特征
18.
SOFTWARE REALIZATION OF PRESSURE AND TEMPERATURE CONTROL ON GAS HEATING FURNACE FOR FORGING
锻造煤气加热炉压力及温度控制软件的实现