1.
Rapid Restoration of Scuffed Surface of Aircraft Parts Made of Hard-Aluminum Alloy by Brush Electroplating
飞机硬铝构件表面划伤的电刷镀快速修复
2.
Research on pulsed MIG welding for heavy thickness aluminum components without preheating
大厚度铝构件无预热状态下的脉冲MIG焊
3.
bridge section (i.e., parts of structures) of iron or steel
铁或钢制铝制桥梁部件（即结构零件）
4.
Study on Stability Capacity of Aluminium Beam-Columns;
铝合金结构压弯构件稳定承载力研究
5.
Study on Corrosion Behaviors of the LY12CZ Aluminum Alloy Plane Component;
LY12CZ铝合金飞机构件腐蚀行为研究
6.
Research on the Nonlinear Stability of Aluminum Alloy Axial Compression Members;
铝合金轴心受压构件非线性稳定研究
7.
Manufacturing Technique of Orthogonal Banding for Aluminum Honeycomb Sandwich Structure
铝蜂窝夹层板正交结构件的制造方法
8.
Research and development of calculation software for effective section properties of aluminium members
铝合金构件有效截面特性计算软件的研制
9.
Technology for Renovating Aeroplane Aluminun Alloy Structural Member Corrosion in Original Place
飞机铝合金结构件腐蚀的原位修复工艺研究
10.
Stability Analysis of Axially Loaded Aluminum Alloy Pipe;
轴心受压铝合金圆管构件稳定承载力研究
11.
Numerical Simulation of Distortions Resulted from Residual Stresses in Aircraft Aluminum Parts;
航空铝合金残余应力引起构件变形的数值模拟
12.
Study on the High-speed Milling Process for the Weak Rigidity Workpieces of Anti-rust Aluminum Alloy
防锈铝合金弱刚度复杂构件高速铣削工艺研究
13.
Aliquation defect supersonic detection method of aluminum alloy component compound
铝合金结构件化合物偏析缺陷超声波探伤方法
14.
Direct strength method for calculation of the bearing capacity of thin-wall aluminum alloy members under axial load
薄壁铝合金轴压构件承载力计算的直接强度法
15.
Theoretical study on the reduced coefficient of asymmetrical cross-section for aluminium columns
铝合金轴心受压构件截面不对称性系数研究
16.
Effectsof Thermal-cooling Cycle on Dimensional Stability of Strip-shaped Aluminum Alloy Parts
长条状铝合金构件冷热循环尺寸稳定性研究
17.
Experimental Study on High Speed Milling Low-rigidity Structure Part of Aluminium Alloy
铝质弱刚度结构件的高速铣削试验研究
18.
Analyzing and controlling distortion of aircraft aluminium alloy structural part in NC machining
飞机铝合金结构件数控加工变形分析与控制