1.
Supervision of Furnace Thermal Current Intensity and Prediction of Furnace Lining Thickness;
高炉热流强度的监测与炉衬厚度预报
2.
Methodological research about numerical simulation of lining erosion thickness on the basis of inverse heat transfer
基于传热反问题的高炉炉衬侵蚀厚度的数值模拟方法研究
3.
Effect of lining thickness lack on lining safety for highway tunnel
公路隧道衬砌厚度不足对衬砌安全性影响
4.
Research on Critical Failure Vibration Velocity of Concrete Lining in Different Thickness Under the Acting of Blasting Vibration
不同厚度砼衬砌的爆破临界振速研究
5.
The Probability Distribution Rule of Highway Tunnel Concrete Construction Thickness and Reliability Analysis;
隧道二次衬砌厚度概率分布特征与可靠度分析
6.
Packing gauge: A measuring instrument which is used to determine the space between plate, or blanket, and the cylinder bearers and thus, the amount of packing needed.
衬垫厚度计:测量仪器。用来测量印版，胶布和圆筒肩铁间的空位，因此而决定衬垫所需的厚度。
7.
Simulation Study of the Relationship between Thermal Image on Outside Shell and Inner Lining Thickness of Ladle;
钢包外壁热像与内衬厚度之间关系的模拟研究
8.
Analysis by Finite Element Method of Substrate Thickness of Microstrip Patch Antenna Surrounded by Photonic Band Gap Structure
环绕光子晶体微带贴片天线衬底厚度影响分析
9.
Research on Different Soft Liner/Base Resin Thickness Ratios And Fracture Behavior of Denture Base
义齿用基托软衬厚度比与断裂行为的实验研究
10.
Thermal Distribution Design,Status Analysis and Working Lifetime Prediction for Blast Furnace Hearth Lining
高炉炉缸内衬的温度场设计及其状态与寿命研究
11.
Granularity Proportioning of Lining of Intermediate Frequency Induction Furnace and Service Life
中频感应熔炼炉砂型炉衬材料的粒度配比与使用寿命
12.
blast furnace tear down apparatus
高炉旧炉衬拆除设备
13.
Research for coiler speed influence on exit strip gauge in a Steckel Mill
炉卷轧机两侧卷取速度对带钢厚度的影响
14.
refractory lining
耐火衬砌, 耐火炉衬, 耐火(材料)衬里
15.
A high density MDF cabinet with walls of varying thickness is heavily damped with bitumen and lined with anechoic grade foam.
高密度的MDF箱体四周配以不同厚度的高阻尼沥青和内衬消声泡沫。
16.
Study on Online Temperature Field Simulation System of Walking Beam Slab Reheating Furnace in Jigang
济钢厚板步进加热炉在线温度场仿真系统研究
17.
To reduce bulk, trim interfacing within seam allowances to 1.3cm(1/2 inch)
为了减少厚度,将缝份处的衬布修剪掉1.3cm(1／2英寸)。
18.
Test method for thickness of lightly doped silicon epitaxial layers on heavily doped silicon substrates by infrared reflectance
GB/T14847-1993重掺杂衬底上轻掺杂硅外延层厚度的红外反射测量方法