1.
Crankshaft Omnidirection Image Information Collection and There-dimensional Reconstruction
曲轴毛坯全方位图像信息采集及三维重构
2.
The nationalization of engine crankshaft blank for Jetta, Bora and Golf car was realized.
实现了捷达、来和高尔夫轿车发动机曲轴毛坯的国产化。
3.
Study of the Key Technology on Crankshaft Locating Basis Based on Optimum Blank Matching
基于毛坯最佳匹配的曲轴定位基准的关键技术研究
4.
Application of Numerical Simulation in Forging Die Design
数值模拟在齿轮轴毛坯锻模设计中的应用
5.
Reasonable Control the Upper Crop End and Lower Crop End Weights,and Improve the Utilization Rate of Crankshaft Blank of Electroslag Remelting Ingot
合理控制切头切尾量,提高电渣钢曲轴坯成材率
6.
Study on Making Process and Mould Structure of None-phase Angle Crankshaft with Four Cylinder Sleeve
无相位角四拐曲轴的制坯工艺及模具结构优化
7.
Turning operations are required to make many different cylindrical shapes, such as axes, gear Blanks, pulleys, and threaded shafts.
车削用来切削出不同的圆柱形,如转轴、齿轮毛坯、滑轮、螺纹轴等。
8.
The colded precision rolling machine for bearing ring is a new advanced technology for process precision bearing blanks.
轴承套圈精密冷碾扩机床是一种加工轴承套圈精密毛坯的新技术。
9.
Application of Surface-flattening Technology in Blank Development of Automotive Cover;
曲面展平技术在汽车覆盖件毛坯展开中的应用
10.
Investigation Rough Correct Rule of Unclosed Cure Elongate Flange;
非封闭曲线伸长类翻边毛坯修正规律研究
11.
It can replace traditional isothermal anneal as advance heat treatment of roughcast of bearing rings.
可部分替代传统的等温退火作为轴承套圈毛坯的预先热处理。
12.
Because of very low in the proportion of blanks made from bar and tube, the forging process is still a basic process obtained blanks in our bearing factories.
我国轴承制造厂采用管料和棒料供坯的比重很小,锻压加工仍是毛坯的基本加工工序。
13.
Research on Equipment of Rapid Manufacture for Rough Moulds Surface Based on the Principle of Discretization;
基于曲面离散化方法的模具型面毛坯快速制造装备研究
14.
Abstract: The colded precision rolling machine for bearing ring is a new advanced technology for process precision bearing blanks.
文摘:轴承套圈精密冷碾扩机床是一种加工轴承套圈精密毛坯的新技术。
15.
Upon analysis of forging technology of bearing sleeve domestic and overseas, tower forging and features for this have been introduced.
在分析国内外轴承套圈毛坯锻造工艺的基础上,介绍了轴承套圈塔锻工艺及其特点。
16.
crankshaft (main journal turning lathe)
曲轴（主轴颈）车床
17.
upper center crankshaft bearing
曲轴主轴承上中轴瓦
18.
boasting chisel
用于制作毛坯的大凿子