1.
Analysis of the Bent Axle Fracture Influence Factors of the Mining Engine;
矿山发动机曲轴断裂影响因素的分析
2.
A Four-cylinder Diesel Engine Crankshaft Fracture Failure Analysis And Improvement
某四缸柴油机曲轴断裂失效分析及改进
3.
Fracture Analysis and Improved Design to JZH25 Homogenizer Crankshaft Based on Finite Element;
基于有限元的JZH25型均质机曲轴断裂分析及其改进设计
4.
Research of Magnetic Memory On-line Detect on the Crack of Marine Diesel Engine Crankshaft;
船舶柴油机曲轴裂纹故障磁记忆在线诊断技术研究
5.
The Analysis of Fracture Axis Pin Made of 18Cr2Ni4WA Steel;
18Cr2Ni4WA钢销轴断裂失效分析
6.
Meanwhile, the fracture was accelerated due to the uneven surface hardness and the unreasonable distribution of the hardening layer on the crankshaft, and the bad lubrication condition in service.
同时轴左颈表面硬度不均匀、淬硬层分布不甚合理，工作过程中润滑条件差，加速了曲轴的断裂。
7.
The results indicated that the fracture mode is the fatigue failure.
结果表明，其断裂形式为弯曲疲劳断裂。
8.
crossbreaking strength
横断裂强度, 挠曲强度
9.
Design and Simulation of Fracture Splitting Machine Tool for Bearing Bracket of Engine Crankcase
发动机缸体曲轴轴承座裂解机床设计及仿真
10.
Numerical analysis on fracture splitting technology of main bearing block of engine
发动机曲轴箱轴承座裂解加工数值分析
11.
Analyzing the Cause of 42CrMo Crankshaft Cracking by Upset Forged
42CrMo曲轴镦锻开裂原因分析
12.
Impact Fracture Curve and Fractured Surface Morphology of PA 6/POE Blends
PA 6/POE冲击断裂曲线及断面形貌
13.
Fracture Toughness and Failure Curve of 22NiMoCr3-7 Steel in Ductile-Brittle Transition Range
22NiMoCr3-7钢韧-脆转变区断裂韧度及断裂失效曲线
14.
Analysis to Connecting Shaft Fracture between Motor Reducer and Main Bearing of Cutting Disc of a Shield
盾构电机减速器与刀盘主轴承连接轴断裂分析
15.
Reason for Mine Car Axle's Break and Countermeasures
底卸式矿车轴频繁断裂的原因及轴卡的改进
16.
Reason Analysis of Blade Cracking in Catalytic Cracking Axial-flow Compressor
催化裂化轴流压缩机叶片疲劳断裂原因分析
17.
The Analysis of Fracture for the Flat Head of Universed Joint
1150初轧机万向接轴扁头断裂分析
18.
The Rupture Failure Reason and Analysis of the Pivot;
42号自卸车销轴断裂失效分析及研究