1.
Preparing of 3D C/SiC-TaC Composites Using Slurry and CVI Method and Research on Anti-ablation Property
料浆浸渗法结合CVI制备3D C/SiC-TaC复合材料及其烧蚀性能研究
2.
Study on the Fabrication and Properties of MoSi_2/SiC That by Melt Infiltration;
直接浸渗法制备MoSi_2/SiC复合材料及材料性能研究
3.
Used in grinding of chemical pulp,semichemical mechanical pulp,high-yield pulp(cold impregnation) and fiber board materials.
用于化学浆、半化学机械浆、冷浸法高得率浆及纤维板料的研磨。
4.
Investigation on Al/SiCp Electronic Packaging Materials Fabricated by Gas Pressure Infiltrating Processes;
气压浸渗法制备Al/SiCp电子封装材料的研究
5.
The desizing mixture is applied to the fabric using a padder.
退浆混合料都用浸轧机浸敷于织物上。
6.
A Study on the Bending Strength and Wear Resistance of SiC/Al Composites by Pressureless Infiltration;
无压浸渗法制备SiC/Al复合材料强度和耐磨性的研究
7.
Preparation and Thermal Expansion Propertise of SiC_P/Al Composites by Vacuum Pressure Infiltration Precess;
真空压力浸渗法制备SiC_P/Al复合材料及热膨胀性能研究
8.
Synthesis and Anti-Ablation Proterty Investigation of C/C-TaC Composites;
化学液相浸渗法制备C/C-TaC复合材料及其烧蚀性能研究
9.
Structure and Properties of C/SiC Friction Material Made by Reactive Melt Infiltration;
反应熔体浸渗法制备C/SiC摩阻材料的结构与性能
10.
Effect of the Reactive Additions on the SiCp/Al Composites Fabricated by the Pressureless Infiltration Technique;
活性剂对无压自浸渗法制备SiCp/Al复合材料的影响
11.
Fabrication and Properties of β-SiCp/Al Electronic Packaging Material by Pressureless Infiltration;
无压浸渗法制备β-SiCp/Al电子封装材料工艺与性能研究
12.
Study on Technology and Properties of Al_2O_(3f)/AZ91D Composite Prepared by Pressrueless Infiltration Method;
无压浸渗法制备Al_2O_（3f）/AZ91D复合材料工艺及性能研究
13.
Presureless Infiltration and Thermal-properties of SiC Porous Ceramics Reinforced Al Composites for Electronic Packaging
SiC/Al基电子封装复合材料的无压浸渗法制备与热性能研究
14.
The structure/ function integrating aluminium matrix composite was prepared by pressureless infiltration( a new casting technology) and the properties of the composite were tested in this paper.
采用新型铸造-无压浸渗法制备了结构/能一体化铝基复合材料,并对该复合材料进行了性能测试。
15.
Effect of Infiltration Metal on Structure and Properties of C/C Composite Materials;
金属浸渗对碳/碳复合材料组织、性能的影响
16.
The FEM Simulation and Pressure Infiltration of Al_2O_3p/ZL104 Composites;
压力浸渗制备Al_2O_3p/ZL104复合材料及有限元模拟
17.
The FEM Simulation of the Liquid Infiltration-Extrusion Process Including Damage for Composites;
复合材料液态浸渗挤压有限元模拟及损伤研究
18.
The FEM Simulation of the Liquid Infiltration-Extrusion Process for Composites;
复合材料液态浸渗挤压过程的有限元模拟