1.
bascule escapement
![点击朗读](/dictall/images/read.gif)
锁轴式天文钟擒纵机构
2.
Remove the memory stop/lockcollar assembly by turning the plastic memory stop counterclockwise.
逆时针旋转塑料记忆止动装置,拆卸记忆止动/锁轴套总成。
3.
Loosen the lock collar by turning it counterclockwise until it seats against the top of the memory stop.
逆时针旋转锁轴套将其松开直到其接触到记忆止动装置的顶部位置。
4.
cam shaft reversing lock
![点击朗读](/dictall/images/read.gif)
凸轮轴换向闭锁装置
5.
disc brake shaft locking device
![点击朗读](/dictall/images/read.gif)
圆盘式制动器轴锁紧装置
6.
CAUTION: NEVER REMOVE SHAFT LOCK PLATE RETAINER
![点击朗读](/dictall/images/read.gif)
注意:切勿移动轴锁止板扣件
7.
Clinical Application of Modified Clavicle Axial Projection
![点击朗读](/dictall/images/read.gif)
锁骨轴位改良投照技术的临床应用
8.
The cap and rod have bearings which permit the crankpin to rotate freely within the rod.
![点击朗读](/dictall/images/read.gif)
轴瓦盖和连杆中有轴瓦,它允许连杆内的曲柄锁自由地转动。
9.
Heavy-duty thrust bearing; locked to prevent axial movement.
![点击朗读](/dictall/images/read.gif)
坚固耐用的止推轴承;锁定后有利于阻止轴向运动。
10.
EXPERIMENT RESEARCH ON MISALIGNMENT AND FREQUENCY-LOCKING TROUBLE OF ROTOR-COUPLING-BEARING-LSOLATOR SYSTEM
转子-联轴器-轴承-隔振器系统不对中及锁频故障实验研究
11.
a spool cannon, a key that wouldn't unlock anything,
![点击朗读](/dictall/images/read.gif)
一门线轴做的大炮;一把什么锁也不开的钥匙;
12.
Influential Analysis of Working Roller Locking Cylinder on Rell Beaving
![点击朗读](/dictall/images/read.gif)
工作辊锁紧缸异常对轧辊轴承影响分析
13.
A PRELIMINARY REPORT OF OPEN REDUCTION AND NUMELOCK II POLYAXIAL SYSTEM FIXATION FOR TYPE C FRACTURE OF DISTAL RADIUS
多轴锁定钢板治疗桡骨远端C型骨折初步报告
14.
Polyaxial locking plate for the treatment of tibial plateau fractures
![点击朗读](/dictall/images/read.gif)
多轴锁定解剖型钢板治疗胫骨平台骨折
15.
CQ6132W Infinitely variable speeds, power-driven feed in longitudinal and cross directions, Safety interlock, a overload safety device.
CQ6132W主轴无级变速,纵横向机动走刀,安全互锁,超负荷保险。
16.
Machine tools--Spindle noses and face plates--Sizes for interchangeability--Part 2: Camlock type
GB/T5900.2-1997机床主轴端部与花盘互换性尺寸第2部分:凸轮锁紧型
17.
A locking pin inserted in the end of a shaft, as in an axle, to prevent a wheel from slipping off.
车辖,制轮装在辕底部,如车轴上用来预防车轮滑动锁栓
18.
In other words, the regular side of the cam shaft and the fuel running of the main engine are interlocked with each other.
换句话说,凸轮轴的调油侧与主机的燃油运转是相互联锁的。