1.
A Probe into the Process Realization of Turning instead of Grinding the Heated Axial Workpiece
轴类工件热后以车代磨的工艺实现探析
2.
It can be used as a tool to ride instead of walk.
滑板车还不污染空气，以后可以当代步工具了!
3.
A Coupled Thermal-Contact Analysis on Worn Tread Wheels of Vehicles
铁路车辆磨耗型车轮的三维热接触耦合分析
4.
They continued getting their knives ready as the water to boil the dog heated up.
煮狗的水热起来之后，他们继续磨刀。
5.
An Ecological Study of Prose Writing since the 1990s;
“散文热”的背后——1990年代以来的散文创作生态观察
6.
ground coconut blended with hot water or hot milk and strained.
磨碎的椰子与热水或热奶混合，然后过滤。
7.
The study indicates that main types of damage to the coupler are adhesive damage and abrasion damage.
研究表明,车钩磨损的主要形式是粘着磨损以及伴随粘着磨损而产生的磨粒磨损。
8.
HEATED REAR WINDOW DEFOGGER GRID
电热后车窗除雾器网线
9.
Lightly scuff sand flywheel face with 180 grit emery clotThen clean surface with brake or carburetor cleaner.
用180金刚砂纸轻轻地磨擦飞轮表面。然后用煞车或化油器清洗器加以清洗。
10.
Breaking in a new car requires careful driving at moderate
新车磨合须以中速小心行驶一段时间。
11.
Effect of post heat treatment on microstructure and abrasive wear property of Fe-Cr-C hardfacing alloy
焊后热处理对Fe-Cr-C耐磨堆焊合金组织和磨损性能的影响
12.
The ingredients were ground into powder, which, when mixed with hot water,
这些原料被研磨成粉，再倒入热水搅拌后，
13.
Thermal Fatigue Property of RE Modified Low Alloy Wear Resisting Cast Iron
稀土变质后低合金耐磨铸铁的热疲劳性能
14.
The nozzle is fitted with a protective sleeve which can be replaced when it is worn.
喷咀上装有保护套，磨损后可以更换。
15.
Lose time to ARR Guangzhou after 1000z.
消磨时间在1000以后到达广州。
16.
Effect of Heat Treatment with Residual Rolling Temperature on Impact Fracture Resistance of Cross Rolled Low Chromium White Cast Iron Grinding Ball
轧后余热热处理对斜轧低铬白口铁磨球抗多冲击破坏能力的影响
17.
It can be used for last chamfering in the continuous machine and.replace the abrasive wheel.
直接用于连续磨边线上后级倒角精磨，替代普通碳化硅倒角轮。
18.
the creaking of the sails, and the shouting of the millers.
还有风车翼的叽嘎声，以及磨坊主人的叫喊声。