1.
PRETREATMENT FOR ELECTROPLATING OF MAGNESIUM ALLOY
AZ31镁合金电镀前处理工艺研究
2.
It used before electroplating to improve the adhesion of coat, before painting to enhance the pigmentation.
在电镀前处理，可增强镀层的附着力，在喷漆前处理，可增强油漆的着色力。
3.
Pretreatment,Electroplating and Recycle of Diamond Powder in Mosaic Plating
镶嵌镀中金刚石粉的前处理、电镀与回收
4.
Pretreatment for Electroplating of ABS Plastics by Potassium Hypermanganate
ABS塑料电镀的高锰酸钾前处理工艺
5.
Pretreatment Process and Electroplating on Surface of Magnesium Alloy
镁合金表面前处理浸锌工艺及电镀铝研究
6.
Preparation of wood-based electromagnetic shielding composite by electroless nickel plating on birch veneer pretreated with NaBH_4
Wo NaBH_4前处理桦木化学镀镍制备木质电磁屏蔽复合材料
7.
Preparation and characterization of activation membrane of chemical plating pretreatment on electromagnetic shielding textiles
新型电磁屏蔽纺织品化学镀前处理活化膜的制备及表征
8.
Coat the surface with either nickel or copper (nickel is now generally the preferred commercial process) from an electroless plating solution.
用镍或者铜在无镀电镀液中进行表面处理，目前镍是更流行的商业用工艺。
9.
Silver recovery and cyanide removal from silver-plating wastewater using pulse-electrolysis
脉冲电源电解处理含氰含银电镀废水
10.
Practice of Zinc-Plating Wastewater Treatment at Middle and Small Plating Plants
中小型电镀厂镀锌废水处理的工艺实践
11.
Electrodeionization Process for Heavy Metal Removal from Electroplating Wastewater;
电去离子技术处理含重金属电镀废水
12.
Appliance of IrO_2-RuO_2/Ti Electrode in Pulse Electrolysis of Electroplating Wastewater Containing Cyanide and Silver
IrO_2-RuO_2/Ti电极处理含氰含银电镀废水
13.
Study on Treatment of Electroplating Waste-water with Immobilized SRB
硫酸盐还原菌(SRB)固定化技术处理镀铜、镀铁混合电镀废水的研究
14.
Bolts and nuts are plated for corrosion resistance.
螺栓和螺母经过电镀防腐蚀处理。
15.
Whet her electroplating quality is good or bad depends on pre-treatment.
铝制件电镀质量的好坏，预处理是关键。
16.
Application of One Step Purificator in Treating Electroplate Wastewater
一步净化器在处理电镀废水中的应用
17.
Experimental Study on Treatment of Znic Containing Electroplating Wastewater by Chlorella;
含锌电镀废水生物吸附处理技术研究
18.
Research on the Treatment of Electroplating Rinsing Wastewater with Separating Membrane;
膜分离技术处理电镀废水的实验研究