1.
An Analysis Method of the Whole Working Course for the Force Transferring Mechanism in Fixed Segment of Tensile-type Anchor Bar
拉力型锚杆锚固段传力机理的全过程分析方法
2.
Anchoring effect of pressure-type anchor rods on anchored section
压力型锚杆锚固段锚固效应特性分析
3.
Experimental and Analytical Study on Pull-out Resistance of Adhesive Anchors;
粘结型锚杆拉拔承载力的试验与理论分析
4.
Field Testing and Numerical Analysis on Tensile Type Anti-float Anchor;
拉力型抗浮锚杆的现场测试与数值分析
5.
MODIFICATION OF FIP STRUT-AND-TIE MODEL FOR DESIGN OF INTERIOR ANCHORAGE ZONES OF POST-TENSIONED CONCRETE STRUCTURES
预应力混凝土内部锚固区拉压杆模型的修正
6.
Model test on bearing behavior of pile-wharf structure without anchored retaining wall by tie rods or batter piles
无锚碇墙拉杆的直桩码头受力性状模型试验
7.
Strut-and-tie model reinforcement of the external prestressed box-beam anchor block
体外预应力箱梁锚固块拉压杆模型法配筋
8.
Stress distribution along bonded length of new-type recoverable anchor
新型可回收锚杆锚固段应力分布规律
9.
Strut-and-tie Model Method for Bursting Force Calculation of Post-tensioned Anchorage Zone in Rectangular Beam
矩形截面梁后张锚固区劈裂力计算的拉压杆模型法
10.
Strut-and-tie models for end anchorage zones in prestressed concrete T-section girder bridges and reinforcement design
预应力混凝土T梁桥端部锚固区拉压杆模型及配筋设计
11.
The Dispersed Stock of Pulling Force of One Storey of Deep Bases Hole of Rich Water and Sand is Propped up and Partial to Constructing the Worker Law
富水砂层深基坑拉力分散型锚杆(索)支护施工工法
12.
Anchoring capacity of tensile rock bolt in ultimate limit state
极限状态下岩体受拉锚杆锚固承载力的计算
13.
Field Tests on the Anchor Effect of Pressure and Tensile Anchor Cable Structures
压力型和拉力型锚索锚固作用的原位试验研究
14.
The Field Pull-out Tests and Computation of Distribution of Shearing Force of Pressure-type Anchor;
压力型锚杆现场试验及剪力分布计算
15.
Characteristic and Numerical Analysis on Pressure-dispersive Anti-float Anchor;
压力分散型抗浮锚杆特性及数值分析
16.
Apply Research of the Theory of Wholly Grouted Anchor Load Transfer Model;
全长粘结式锚杆传力模型及应用研究
17.
Application of Pressure Decentralized Anti-floating Anchor in Engineering
压力分散型抗浮锚杆在工程中的应用
18.
Calculation Method of Anchoring Segment Length of Cable
拉力型锚索锚固段长度的一种确定方法