1.
The Simulation of Heat Source and Process in Laser Welding for Stainless Steel;
不锈钢激光焊接热源及过程的模拟与仿真
2.
Influences of welding parameters on weld appearance in laser-MIG hybrid welding of AZ31
AZ31激光-MIG复合热源焊接参数对焊缝形貌的影响
3.
Technological Investigation on Laser-MAG Hybrid Welding of High Strength Steels
高强钢激光-MAG复合热源焊接工艺研究
4.
Research on Studs Hybrid Heat Source Welding Technology and the Theoretical Test Prototype;
附座复合热源焊接方法与原理试验样机的研究
5.
Analysis of Droplet Transfer Behavior in CO_2 Laser-MIG Hybrid Welding Process;
CO_2激光-MIG复合热源焊接熔滴过渡的行为分析
6.
Study of Laser-TIG Hybrid Welding Process for Magnesium Alloy and Its Numerical Simulation;
镁合金复合热源焊接工艺与数值模拟研究
7.
Study on the Laser-TIG Hybrid Welding of Dissimilar Magnesium Alloy and Steel with Ni as Interlayer
镁/钢异种金属激光-TIG复合热源镍夹层焊接研究
8.
On the Characteristics of Nd: YAG Laser-Short Circuiting Transfer GMA Hybrid Welding
Nd：YAG激光—短路过渡GMAW复合热源焊接特性研究
9.
Application of combined welding heat source in arc welding simulation
组合热源模型在焊接数值模拟中的应用
10.
Weld whose heat resource is the laser, also owns the advantage such as low heat input and small heat deform.
以激光为热源的焊接同样也可以得到低热输入、变形量极少的效果。
11.
Finite Element Analysis of the Welding Temperature Profiles and Thermal Distortion in Laser +GMAW Hybrid Welding Process;
激光+GMAW复合热源焊接温度场和热变形的有限元分析
12.
cooling after postweld heat treatment
焊接热处理之后的冷却
13.
synthetic apparatus for weld thermal cycle
焊接热循环模拟装置
14.
Study on Laser-metal Active Gas (MAG) Hybrid Welding Technology and Its Mechanism of Stainless Steel;
不锈钢激光-MAG电弧复合热源焊接工艺及机理研究
15.
Appearance of weld and impact toughness for the joints of ferrite stainless steel by laser-MAG hybrid welding
铁素体不锈钢激光-MAG复合热源焊缝成形及接头冲击韧性分析
16.
Numerical Simulation of Laser Welding for BT20 Titanium Alloy Mouthpiece by Using the Gauss Heat-Source Model
基于Gauss热源模型的BT20钛合金管口激光焊接数值模拟
17.
Quality Control of the Fillet Weld in the Tube and Tube Sheet of Heat Exchanger
换热器管-管板角焊缝焊接质量的控制
18.
The necessarily of post-weld heat treatment of spherical tanks was emphasized.
强调了焊接球罐焊后热处理的必要性。