1.
A Direct Algorithm of the Distance Between Two Parallel Planes in Space;
空间两平行平面间距离的一个直接算法
2.
Analysis on the space of circular micro-piles in plannar failure
微型圆桩加固平面滑坡的桩间距分析
3.
Of, relating to, or designating curves or surfaces everywhere equidistant.
距离相等的属于、有关或指出曲线之间或平面之间处处等距的
4.
The spacing between atomic planes in a nickel crystal is 2. 15×??.
一块镍晶体中各原子平面的间距为2．15×?∶住?/UK>
5.
Influence of the distance between the filament and the substrate on the growth of large area diamond film;
灯丝平面与衬底间距对金刚石膜沉积的影响
6.
A nonlinear time series analysis method has been used for reconstruction of sea surface temperature (SST) anomalies.
用非线性时间序列分析方法对海平面温度距平场进行重构。
7.
remote plan position indicator
远距离平面位置指示器
8.
remote plane position indicator
远距离平面位置显示器
9.
Construal Level Theory:From Temporal Distance to Psychological Distance
解释水平理论:从时间距离到心理距离
10.
Parallel wire strands supported the precast deck every 27ft
使用平行钢丝索来支承预制拼装的桥面结构，钢索间距为27英尺。
11.
The roof and the floor systems are directly supported by horizontal beams and girders spanning the distance between the vertical columns
屋面和楼板系统直接支承在跨越竖直柱子间距的水平主次梁上。
12.
Study on Nonhyperbolic Traveltime-offset of Pure Modes for a Horizontal Interface in the TI Media with an Arbitrary Spatial Orientation;
水平界面任意空间取向TI同类反射非双曲时距研究
13.
Research on the the Behaviors of Structural Column Spacing to Composite Masonry Walls in the Aspect of Eccentrically Compress
关于构造柱间距对组合墙出平面偏心受压性能影响的试验研究
14.
Application of unequally-spaced and non-linear three-hydrophone array in underwater acoustic coplanar target passive localization
不等间距非直线三元阵在水声平面声源被动定位中的应用
15.
flange focal distance
镜座距，指镜头座与菲林平面的距离
16.
Camera extension: The length of bellows in a process camera. It is the distance between the lens diaphragm and the image plane.
相机伸长度:制版照相机的暗箱长度。即是镜头光圈与影像平面之间的距离。亦称像距。
17.
In three-dimensional space, the boundary is a two-dimensional surface-that is, an area, the size of which increases as the square of the distance.
在三维空间中，边界是一个二维的面，也就是一块面积，其大小会随著距离的平方而增加。
18.
In plane, they are about equidimensional.
在平面中，他们大体在各个方面等距。