1.
Modeling of Metal Hot Deformation and Weld Solidification Process Using Cellular Automaton Method
金属热变形及焊缝凝固过程的元胞自动机模拟
2.
Simulation of microstructure during weld solidification based on cellular automaton
基于CA模拟焊缝凝固过程枝晶生长的分析
3.
EFFECT OF NICKEL ON SOLIDIFICATION CRACKING IN LOW C LOW ALLOY STEEL WELD METAL
镍对低碳低合金钢焊缝金属凝固裂纹敏感性的影响
4.
Microstructure and Solidification Mode of Welding Joint of Cr15Mn9Ni1N Stainless Steel
Cr15Mn9Ni1N不锈钢焊接接头的组织及凝固模式
5.
Analysis for Causes of Cracking in the Concrete Structure and Strengthening Technology;
混凝土结构裂缝成因分析及加固技术
6.
The Quality Test and Strengthening Scheme for Cast-in-place Concrete Floor of Residential Building
某现浇混凝土楼面板裂缝检测及加固
7.
Calculation Method of Concrete Beam Crack Reinforced by FRP
FRP加固混凝土梁裂缝的计算方法
8.
Welding the welds which are stagger first, then is the straight ang long weld.
先焊错开的端焊缝，后焊直通长焊缝。
9.
Simulation of Fluid Dynamics Behavior and Solidified Structure in Welding Pool;
焊接熔池的流体动力学行为及凝固组织模拟
10.
Microstructure of Soldering Joint of Rapidly Solidified Sn2.5Ag0.7Cu Solder Alloy
快速凝固态Sn2.5Ag0.7Cu钎料钎焊接头的显微组织
11.
Microstructural characteristic of rapid solidification welding joint of melt-spun Cu-Sn peritectic alloy foils
急冷Cu-Sn合金的快速凝固焊接接头组织特征
12.
Production and Prevention of Solidification Crack in Large-heat-input Submerged-arc Welding
大线能量埋弧焊凝固裂纹的产生及预防
13.
RAPID SOLIDIFICATION WELDING OF ULTRA-THIN Zr_(55)Cu_(50)Al_(12)Ni_3 AMORPHOUS FOILS
Zr_(55)Cu_(30)Al_(12)Ni_3非晶超薄箔材的快速凝固焊接
14.
Crack Extension Resistance Performances of Cracked Concrete Beam Reinforced with CFRP Sheet
碳纤维布加固含裂缝混凝土梁的裂缝扩展阻力性能
15.
Study on Crack and Reinforcement Analysis for Present Concrete Frame Structures;
既有混凝土框架结构裂缝分析及加固方法研究
16.
Flexural Stiffness and Crack Widths of Rectanglar Reinforced Concrete Beams Strengthened with Externally Bonded CFRP Sheets;
CFRP加固矩形截面钢筋混凝土梁刚度、裂缝研究
17.
Identification, Repair and Strengthening of the Concrete Crack in Building Engineering;
民用建筑混凝土结构裂缝的鉴定、修补及加固
18.
Cause Endanger and Countermeasure of Crack in Hydraulic Concrete Structure
水工混凝土结构裂缝形成、危害及其加固措施