1.
Design of an apparatus for testing distortion temperature strength of steel material based on single chip computer
基于单片机的钢质材料变形温度力测定仪的研制
2.
warehouse of material(steel warehouse)
材料仓库(钢材库)
3.
The material blanks of steel bonded carbide
GB/T3879-1983钢结硬质合金材料毛坯
4.
Preparation of Carbon steel/Steel-bonded carbide TLMW50 Cladding and Analysis of Interface
碳钢/钢结硬质合金覆层材料制备及界面分析
5.
Research on Corrosion and Protection of Mild Steel Used to Make Crucible for Magnesium Alloy Melting;
熔镁铁质坩埚材料低碳钢腐蚀与防护的研究
6.
Study of Wear Behavior of Stainless Steel Materials under Hydrogen Peroxide Environment
H_2O_2介质环境中不锈钢材料的磨损行为研究
7.
Fabrication of High Property Cemented Carbide Materials Used in Milling High Manganese Steel
铣削高锰钢用高性能硬质合金铣刀材料的研制
8.
Thought on Technical Permission of Welding Material for the Bearing Pressure Equipment in Steel
钢质承压设备用焊接材料技术条件的思考
9.
Wwlding material: low carbon steel, high strength steel, medium carbon steel, low alloy steel.
可焊接材料：低碳钢、强度钢、碳钢、合金钢。
10.
Most suitable for high efficiency and high quality welding of low carbon steel,stainless steel etc.
最适合高效率、高质量地焊接低碳钢、不锈钢等材料。
11.
Investigation on Interaction between MgO-Al_2O_3 Refractory and Molten Steel in Refining Process;
镁铝质钢包精炼用耐火材料与钢液相互作用的基础研究
12.
The main parts of the pump are generally made of grey cast iron and high-grade carbon steel, and can be used copper or stainless steel to meet the requirements of different medium.
泵的主要材料为灰铸铁和优质碳钢，根据用户需要，可采用铜或不锈钢等材料进行制造。
13.
Helix angle30°2 Flutes,3 Flutes,4 Flutes are mainly used in the processing ordinary materials and middle-high hardness steels.
螺旋角30°刃、刃、刃以适用于加工一般材料及中高硬度钢铁材质等。
14.
Study on the Cemented Carbide Tools with Fe and Ni Binder Phase for Steel Cutting;
用于钢材切削加工的Fe、Ni代Co硬质合金刀具材料的研究
15.
Weldable materials: low carbon steel , high-strength steel ,medium-carbon steel, low-alloy steel.
可焊材料：低碳钢、高强度钢、中碳钢，低合金钢。
16.
Fine stainless material, Elegant Appearance, clean and sanitary, comply with the Food Sanitation Standards.
选用优质不锈钢材料制造，美观实用，干净卫生，符合食品卫生标准。
17.
The material are the high quality cold steeling rolling plate, surface processing with degrease, acid washing, phosphating , static spraying plastic.
材料采用优质冷轧钢板，表面处理采用脱脂、酸洗、磷化、静电喷塑。
18.
An Elementary Research on the Relationship Between the Surface Quality of the Drawn Stainless Steel Cooker and the Die Materials
拉制不锈钢厨具表面质量和模具材料的关系初探