1.
With some CNC machines, even the workpiece loading process has been automated.
在有些数控机床上，甚至工件装夹的过程都是自动化的。
2.
Work-holding devices are called jigs and fixtures.
工件夹持装置叫做钻模或夹具。
3.
The work-piece must be clamped tightly in jaw vice. Be careful and do not hurt fingers when fixing small work-pieces.
工件必须牢固地装夹在虎钳上，装夹小工件时须防止钳口夹伤手指。
4.
Capable of specifying work-holding devices such as jaws and fixtures.
能够详细说明工件夹持装置，如三爪和夹具。
5.
Error Modeling and Analysis of Workpiece Fixturing Scheme for Workpiece-Fixture System
工件夹具系统装夹方案误差建模分析技术
6.
Rapid Jig and Fixture Design by CAXA CAD Software
利用CAXA CAD软件实现工装夹具快速设计
7.
work-holding jig, for machine tools
工具机工件夹紧用夹具
8.
The Processing Technology of a Micro-size and Thin-wall Parts that Difficult-to-install
一种微型、薄壁、难装夹零件的加工工艺方法
9.
Design Scheme of Clamping and Locating in Machining Curved Surface Workpiece
加工曲面工件时的装夹及定位方案设计
10.
clamp, work-holding, for machine tools
机床工件夹紧用夹具
11.
Deformation Prediction and Fixture Layout Optimization of Aerospace Monolithic Components;
航空整体结构件加工变形预测及装夹布局优化
12.
"To grind an internal surface, a small wheel moves inside the hollow of the workpiece, which is gripped in a rotating chuck."
磨削内圆时,把小砂轮安装成能在工件的内孔中来回运动,工件夹在旋转的夹具内。
13.
a device attached to a workbench; has two jaws to hold workpiece firmly in place.
连接着工作台的装置；带有两个夹子把工件适当地固定
14.
Study on Feeding and Recycling Method in High Speed Machining Fixture for Paper Honeycomb Part;
纸基蜂窝零件高速加工装夹系统中填料与回收方法的研究
15.
"The specified installation folder does not exist. Do you want to create the folder?
"指定的安装文件夹不存在。要创建文件夹吗?
16.
An open envelope or folder for filing papers.
文件套，公文夹用来装纸的开口信封或文件夹
17.
Set as Toolbar Folder
设置为工具栏文件夹
18.
chock, work-holding,for machine tools
机床工件夹紧用塞块