1.
Rational Determination of Elastic Gasket Contact Stress and Closure Pressure for Shield Tunnel Segments
隧道管片密封垫接触应力和闭合压力的合理确定
2.
Experimental Study on Stress Relaxation of Waterproof Gasket of River-Crossing Shield Tunnel
越江盾构隧道防水密封垫应力松弛试验研究
3.
Test method for sealing characteristics of gaskets for pipe flanges
GB/T12385-1990管法兰用垫片密封性能试验方法
4.
Key Position Selection in Universal Trapezoidal Tapered Rings of Shield Tunnels
隧道通用楔形管片封顶块位置优选研究
5.
Clean the injector port, replace critical injection port seals, replace injection port liners, and change septa as needed.
清洗进样口，如有必要，更换密封垫，衬管，隔垫。
6.
Waterproofing and sealing of shield tail and sealing grease
盾构法隧道的盾尾防水密封与盾尾密封油脂
7.
Bite type tube fittings--Tipping washer
GB/T3762-1983卡套式管接头用尖角密封垫圈
8.
it was stored in a tube with a break seal.
它保存在一个有断裂密封垫的试管里。
9.
joint gasket- or packing- type, of metal sheeting combined with other material (e.g. asbestos, felt, paperboard)
金属片与其他材料（例如,石棉、毡、纸板）的静密封或填密封式接合衬垫
10.
Spiral wound gaskets test method of hydraulic pressure sealing characteristics
GB/T4620-1984缠绕式垫片水压密封性能试验方法
11.
Spiral wound gaskets test method of steam sealing characteristics
GB/T4621-1984缠绕式垫片蒸汽密封性能试验方法
12.
Research on the New Fluoroelastomer Coat-Metal Gasket for Seal of Internal-combustion Engine;
内燃机用新型氟橡胶涂层金属密封垫片的研究
13.
closed aqueduct system
密封式输水管道系统
14.
All interior surfaces exposed to piped liquid are stainless steel. Full stainless gasket surfaces.
所有与管道输送液体接触的内部表面都是不锈钢。全不锈钢密封垫表面。
15.
"Gaskets are also used to seal joints between other parts, such as between the oil pan, manifolds, or water pump and the Block."
密封垫也同样用于密封其它部件之间的接合处,例如,油底壳、歧管、水泵与气缸体之间的密封。
16.
The Experimental Research of the Contact Pressure of Hydrophilic Sealing Gasket for Shield Tunnel Segments
盾构隧道遇水膨胀密封带接触压力试验研究
17.
Prevention and Control of Water and Sand Gushing at Shield Tail Seal during Shield Tunneling
盾构法隧道掘进中盾尾密封涌水涌砂防治技术
18.
joint gasket- or packing- type, of laminated metal foil
层压金属箔密封或填密封式接合衬垫