说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 坐标控制
1.
Simulative Experiment Research on the Model Identification of Submersible Reference Frame Control System;
潜式坐标控制模型辨识模拟实验研究
2.
The Development and Application of Experimental System in 2-D Control;
坐标控制实验教学系统开发及应用
3.
Nano-CMM Control Based on LabVIEW;
基于LabVIEW的纳米三坐标测量机控制
4.
GPS Control Network Optimization Technology and Coordinate Transformation Study;
GPS控制网优化技术及坐标转换研究
5.
Design of Open Motion Controller of Coordinate Measuring Machines;
三坐标测量机开放式运动控制器设计
6.
Study and Making on A Frequency Indicator of Sit-ups;
红外遥控仰卧起坐达标测试仪的研制
7.
Study on Calculating Approximate Coordinate of Control Network Using Parameter Adjustment
控制网间接平差近似坐标推算的研究
8.
Control Strategy for VSC-HVDC Systems with the dq0 Reference Frame
在dq0坐标系建立的VSC-HVDC控制策略
9.
Right-angle Coordinate Robot Control System with Tiro Motion Controller
基于Trio运动控制器的直角坐标机器人控制系统
10.
Redevelopment of Controller Used for Four Axis CNC Machining Center
四坐标数控加工中心控制器的二次开发技术
11.
The Control Method Research of Three Coordinates CNC Based on Windows;
基于Windows三坐标数控系统控制方法的研究
12.
Design on Open System of Three Axis Numerical Control Machine;
三坐标数控铣床控制系统的开放性设计
13.
CNC Machining of the Workpiece Coordinate System Knife Set of Control Methods
数控加工中对刀设定工件坐标系的控制方法
14.
Error Analysis and Control Methord in Five-coordinate NC Machining for Curved Surfaces
五坐标曲面数控加工误差分析及控制方法
15.
The error signal for the robot controller is therefore defined in Cartesian coordinates.
机器人控制器的误差信号定义在直角坐标系。
16.
Design of Dynamic Models and Control Schemes of Robots in Cartesian Coordinates Space
基于直角坐标的机器人动力学与控制方案设计
17.
Design and Simulation of the Coordinate Measuring Machine s Motion Control System;
三坐标测量机运动控制系统设计与仿真
18.
Research on Sensorless Drive and Control System for PMSM Based on Fictitious Reference Frame
基于虚拟坐标法的PMSM无传感驱动控制系统研究