1.
Theory Research on Forming Characteristic of High Strength Hot Rolled Sheet Metal
高强度热轧钢板成形特性的理论研究
2.
Reaserch on Stamping of High Strength Steel Sheet Car B-Pillar Stiffer
高强度钢板成形轿车B柱加强板的研究
3.
The drum sieve is made of corrugated iron with strip-shaped holes, which is folded to rotundity.
筛网由有条形孔的波形钢板制成并折成筒形。
4.
Research on the Mechanism and Deformation Behaviour of Laser Bending of Shipbuilding Steel Plate;
船用钢板激光弯曲成形机理及成形规律的研究
5.
How do you make the steel plate into different shapes?
怎样将钢板加工成不同的形状呢？
6.
Formation and Control of Oscillation Mark for 304 Stainless Steel Continuous Casting Slab
304不锈钢连铸板坯振痕形成及控制
7.
Numerical Simulation of Laser Bending 1Cr17Ni2 Stainless Steel;
1Cr17Ni2不锈钢板料激光弯曲成形数值模拟
8.
Study on the Hot Stamping Process of High Strength Steel Blanks;
汽车超高强度硼钢板热成形工艺研究
9.
Forming Mechanism of Lamination Defect of Q345B Medium Steel Plate
Q345B中厚钢板分层缺陷的形成原因
10.
Simulation of Wugang Sheet Forming Process and Development of Analysis System;
武钢钢板冲压成形过程仿真及分析系统开发
11.
Research on analytical model of blank temperature prediction for hot stamping of ultra high strength steels
超高强度钢板热成形板料温度的解析模型研究
12.
ched-type piling bar
(钢材) 拱形板桩
13.
Increasing roughness of steel sheet surface is suitable for erichsen test of the laminated steel sheet.
提高钢板表面粗糙度，有利于改善复合钢板的 杯突成形性。
14.
They are made up of high tensile wires and are normally vertical. The deck is usually orthotropic with stiffened steel plateribs or troughs, floor beams, etc.
桥面一般是由加劲钢板肋或槽形板，桥面梁等组成的正交异性板。
15.
Research on Formability and Damage Mechanism of Deep-drawing Sheet Metal;
汽车深冲薄钢板冲压成形及损伤机理研究
16.
Research on the Oxidation Behavior of SPA-H Steel by Continuous Rolling and Simulation for the Rolling Process;
连轧SPA-H钢板氧化行为研究及成形过程模拟
17.
The Control and Prediction of Springback during the Sheet-metal Stamping of Advanced High Strength Steel;
先进高强度钢板冲压成形回弹的预测与控制
18.
Study on the Mechanism of Mild-Soft Sheet Metal Forming and the Method of Avoiding Crack;
低碳钢板冲压成形机理及避免开裂的方法研究