1.
Simulation of Heat Transfer in Cryogenic Treatment and Design of a Test System for Cryogenic Valves;
深冷处理传热模拟及低温阀门试验系统设计
2.
Heat Transfer Simulation in Cryogenic Test of Cryogenic Valves and Development of a Test System for Cryogenic Treatment;
低温阀门冷态试验过程传热模拟及深冷处理设备研制
3.
The cryogenic distribution valve box developing for the cryopump in EAST device
EAST装置内置低温冷凝泵低温分配阀箱的研制
4.
This trap is suitable for low temperature accompanying heat line pipe and working condition which needs low temperature to discharge frozen water.
该阀适用于低温伴热管线和需要低温排除凝结水的工况。
5.
Comparison study of electronic expansion valve and thermal expansion valve for low-temperature devices
电子膨胀阀与热力膨胀阀在低温装置中的比较研究
6.
Seat materials are capable of withstanding lower temperatures without damage.
阀座材料能够承受低温环境的考验而不会被损坏。
7.
Flexible wedges with Stellite seating faces for cryogenic service.
适用于低温环境的钨铬钴合金阀座面的柔性楔板。
8.
engine thermostat housing drain valve
发动机恒温器壳放泄阀
9.
Valves for reducing point of discharge temperature by mixing cold and hot water in branch water lines are available.
这种阀门能够通过调节冷热水的混合比例来降低排放出的热水的温度。
10.
It is approved that dispensing jetting head based on high frequency surge of electromagnetic valve is the better way for low-temperature ice-model forming.
通过实验认为基于电磁阀高频振荡的离散喷射方式最适合于低温冰型成形。
11.
The combined 2 -in -1 Temperature & Pressure relief valve provides the least expensive and proven means for protection against both excessive temperature and pressure emergency conditions.
这种二合一组合式降温减压安全阀以最低的成本提供过热和超压两种危险状态下的安全保护。
12.
Then, pneumatic valve spring made from this spring steel wire have been treated by this investigation of liquid tufftriding process.
然后 ,用以对此规格的钢丝制造的气阀弹簧进行了低温液体软氮化处理。
13.
cryogenic temperature
低温温度（通常低于-100℃）
14.
degumming at low temperature
低温脱胶,低温精练
15.
cold crack temperature
低温龟裂温度,冷裂温度
16.
variable temperature cryostat
可变温度低温恒温器
17.
Has a higher application temperature than Teflon? seated flanged ball valves.
比特氟隆阀座法兰球阀还高的应用温度。
18.
The stem position provides indication that valve is opened or closed.
阀杆的高低能够指示阀门处于开启或关闭状态。