说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 金相冷却速率
1.
Determination of Metallographic Cooling Rate of Meteorites and Study of Thermal History of Their Parent Bodies
陨石金相冷却速率测定及母体热历史研究
2.
EFFECT OF COOLING RATE ON γ' PRECIPITATE OF DZ4125 ALLOY UNDER HIGH THERMAL GRADIENT DIRECTIONAL SOLIDIFICATION
高温度梯度定向凝固冷却速率对DZ4125合金γ′相的影响
3.
Relationship of Cooling Rate and Grain Sizes in ZL205A Alloy;
ZL205A合金冷却速率与晶粒度的关系
4.
Effects of Cooling Rate on Solidification Structure of Zn-3.5Mg Alloy
冷却速率对Zn-3.5Mg合金凝固组织的影响
5.
Influence of Cooling Rate on Precipitated Phase of Super Duplex Stainless Steel
冷却速率对00Cr25Ni7Mo4N超级双相不锈钢析出相的影响
6.
Effect of Cooling Rate on Phase Transformation Process and Microstructure of T91 Ferritic Heat Resistant Steel
冷却速率对T91钢相变过程及组织的影响
7.
Research of relation between air conditioning cooling water conductivity and iron corrosion velocity
空调冷却水电导率与金属铁腐蚀速率关系的研究
8.
The Effect of Cooling Rate on Magnesium Alloy's Microstructure and Properties;
冷却速率对镁合金显微组织以及力学性能的影响
9.
The Effect of Cooling Rate and High Pressure on Microstructure and Phase Transformation of TiAl Intermetallics
冷却速度及高压对TiAl金属间化合物组织及相影响
10.
The film index is higher than that of bulk glass of the same composition as the target, but prepared by rapid quenching from the melt.
薄膜折射率高于与靶成分相同的体型玻璃折射率,而此玻璃是由熔体迅速冷却制得的。
11.
The Influence of Cooling Rate on the Modification Effect of A356 Aluminum Alloy
冷却速度对A356铝合金变质效果的影响
12.
Simulation of Cooling Rate for CuFe15 Alloy by Single Roller Melt-spinning
单辊旋铸CuFe15合金的冷却速度模拟
13.
Continuous Cooling Phase Transformation of Ti-45Al-5Nb(-0.3Y) Alloys
Ti-45Al-5Nb(-0.3Y)合金的连续冷却相变规律
14.
Oil refrigeration power required (approx.)
油冷却功率(大约)
15.
The cooling rate and denudation rate decreased overall from north to south.
总体上自北而南,剥蚀速率和冷却速率均逐渐变小。
16.
Effect of Cooling Rate on Quality of Solder Joints in Lead-Free Reflow Soldering;
无铅回流焊冷却速率对焊点质量的影响
17.
Water Conductivity Control of Water Cooling System in PET Cyclotron
PET回旋加速器水冷却系统水电导率的控制
18.
Effect of cooling rate on solidification structure in high temperature brittle zone of 1Cr18Ni9Ti steel
冷却速率对1Cr18Ni9Ti钢高温脆性区凝固组织的影响