1.
Now, we propose that chisel bit is renewed with more advantageous composite cutter bit gradually.
现在，我们建议用更具优势的复合片齿钎头逐步更新一字形钎头。
2.
Study on the Brazing of Diamond Compact and Cemented Carbide
金刚石复合片与硬质合金的钎焊研究
3.
Microstructure and Residual Mechanical Property of Thermomechanically-Fatigued Composite Solder Joints;
复合钎料钎焊接头热疲劳显微组织与残余力学性能研究
4.
Microstructure and Properties of Vacuum Brazing C_f/C Composites Using Reactive Al Based Filler Metals
铝基活性钎料真空钎焊C_f/C复合材料焊接接头的组织及性能
5.
Microstructure and shear strength of solder joints of SiC_p/Al composites with Ni plating with Sn-2.5Ag-2.0Ni solder
SnAgNi钎料钎焊Ni镀层SiC_p/Al复合材料的接头微观结构及剪切性能
6.
Creep rupture and enhancement mechanism of Ag particle-enhancement composite solder joints
Ag颗粒增强复合钎料钎焊接头蠕变断裂及强化机理研究
7.
Experimental Study on High-frequency Induction Brazing of PCD Compact;
聚晶金刚石复合片高频感应钎焊试验研究
8.
Study on Microstructure and Mechanical Properties of C/C Composite and TC4 Brazed Joint;
C/C复合材料与TC4钎焊接头组织及性能研究
9.
A Method of Improving Brazing Joint Strength of Plated Ceramic to Metal
提高复合电镀陶瓷与金属钎焊接头强度的方法
10.
Microstructure and Property of SiCf-reinforced Titanium Based Composite Joint Using Ti-Zr-Cu-Ni Brazing Filler
采用Ti-Zr-Cu-Ni钎料钎焊SiC纤维增强钛基复合材料的接头组织与性能
11.
The Performance and Application Analysis of the Composite Gaskets by Corrugated Metal Sheet;
石墨波齿复合垫片的性能和应用分析
12.
polycrystalline diamond compact bit
聚晶金刚石复合片钻头
13.
Simulation Research on the Rock Breaking System of Bit Tooth-Row Composite Locomotion;
钻头齿圈复合运动破岩系统仿真研究
14.
Phase Constitution of Soldering Seam and Mechanical Properties of Zn Matrix Filler Metal Soldering Magnesium Alloy AZ31B Joint
Zn基钎料钎焊镁合金AZ31B接头的钎缝物相及力学性能
15.
Study on Soldering Procedure and Joint Properties of Down Quenching SnAgCu Solder Alloy
急冷型SnAgCu系钎料合金钎焊工艺及接头性能研究
16.
Study on Cu-based Filler Metal Brazed Composite Coating with Particle Reinforced;
铜基钎料钎焊颗粒增强复合涂层的研究
17.
Vacuum Brazing Aluminum Matrix Composites with Low Melting Point Solder Development
真空钎焊用低熔点铝基复合钎料的研制
18.
Research on Diamond Enhanced Tungsten Carbide Composite Button and Its Bits;
金刚石—硬质合金复合齿及其钻头的研究