1.
Fractal Model and Simulation of Normal Contact Stiffness of Joint Interfaces and Its Simulation
结合面法向接触刚度分形模型建立与仿真
2.
Analysis and Calculation on Radial Rigidity of High Speed Angle Contact Ceramic Ball Bearing;
高速角接触陶瓷球轴承径向刚度的分析计算
3.
Fractal Model of Tangential Contact Stiffness of Joint Interfaces and Its Simulation
结合面切向接触刚度分形模型建立与仿真
4.
Finite element analysis and application of friction damper tangential contact stiffness
阻尼器切向接触刚度的有限元分析及应用
5.
Study on contact stiffness factor selection method in contact non-linear simulation
接触非线性仿真中接触刚度因子选取的方法研究
6.
An Analytical Method of Stiffness for Angular Contact Ball Bearing of Aeroengine
航空发动机角接触球轴承刚度的一种实用分析方法
7.
Mechanism of 'Stiffness Increase' Phenomenon Induced by Contacts
接触引起的‘刚度增加’现象的机理
8.
Research on Contact Rigidity of the Connecting Pieces between Ship Main Engine and Its Base;
船舶主机与基座连接件的接触刚度研究
9.
Analyze of Interfacial Contact Condition of Semi-rigid Base with Large Thickness Based on FWD;
基于FWD的大厚度半刚性基层层间接触状态分析
10.
Effect of pretension on dynamic stiffness of high-speed angular contact ball bearing
预紧对高速角接触球轴承动态刚度的影响
11.
The Generalized Rigid-jointed Beam Method for Calculating Lateral Distribution of Load in Curved Bridges
广义刚接梁法计算弯桥荷载横向分布
12.
Improvement of measuring method of contact point groove diameter for double-direction thrust angular contact ball bearing
双向推力角接触球轴承接触点沟径尺寸测量方法的改进
13.
Conclusions Short exposure to high concentration of black fused alumina may cause serious aluminosis to the exposers.
结论短期、浓度接触黑刚玉粉尘可引起严重的铝尘肺。
14.
Study on the Contact Stiffness of Mechanical Pair and Dynamic Characteristic of Conjugate Cam
共轭凸轮机构运动副接触刚度分析及动态特性研究
15.
Experimental study on 3D cyclic behaviors of soil-structure interface under constant normal stiffness condition
常刚度条件下粗粒土与结构接触面三维力学特性试验研究
16.
Analysis of stiffness of taper leaf spring based on contact friction
基于接触摩擦的少片变截面钢板弹簧的刚度分析
17.
Standard of test method for surface load capacity of gears
GB/T14229-1993齿轮接触疲劳强度试验方法
18.
Test method for measuring warp on silicon slices by noncontact scanning
GB/T6620-1995硅片翘曲度非接触式测试方法