1.
Design and Manufacture for Strong Shear Rheometer and Experimental Study of Shear Flow Cavitation;
强剪切流变仪的研制及剪切空化的实验研究
2.
testing methods for shear strength of plastics by punch tool
塑料剪切强度试验方法
3.
uniform strain shearing strengh tester
等应变剪切强度测试仪
4.
"Maximum shear Strength 63Kg/mm2(90,000psi) maximum (based on 75% yield) "
剪切强度最大63Kg/mm2(90000psi)(为屈服强度的75%)
5.
Testing Method for Tensile and Shear Strength of High Strength Photosensitive Glue
高强度光敏胶拉伸剪切强度测试方法
6.
Ebonite--Method of test for shearing strength
GB/T1700-1982硬质橡胶抗剪切强度试验方法
7.
testing methods for impact shear strength of adhesive bonds
胶粘剂剪切冲击强度试验方法
8.
Thermal sprayed metallic coatings-Determination of shear strength
GB/T13222-1991金属热喷涂层剪切强度的测定
9.
Testing methods for shear strength of plastics by punch too
GB/T15598-1995塑料剪切强度试验方法穿孔法
10.
testing methods for shear strength of adhesive bonds by tensile loading
用拉伸负荷测定粘合剂剪切强度
11.
testing methods for strength properties of adhesives in shear by compression loading
胶粘剂压缩剪切强度试验方法
12.
testing methods for in-plane shear properties of carbon fiber reinforced plastics by +-45 tension method and two pairs of rails method
纤维增强塑料平面剪切特性试验方法
13.
The shear strenth is equal to the cohesion of substance.
剪切强度等于物质的内聚力。
14.
MICROSTRUCTURE AND HARDNESS OF ADIABATIC SHEAR BANDS IN HIGH STRENGTH STEELS
高强度钢中绝热剪切带的组织和硬度
15.
Performance Research of Micro-Filtration Membrane Separator with Rotational Flow;
旋转剪切流强化微滤膜器的性能研究
16.
Test Attempt to Shear Strength of in Terface for Embedded Optical Fiber Sensors
埋入式光纤传感器界面剪切强度实验
17.
Effect of reflow soldering on IMC and shear strength of SnAgCu solder joint
回流焊对SnAgCu焊点IMC及剪切强度的影响
18.
Effects of particle shape on shear strength of discrete media
颗粒形态对离散介质剪切强度的影响