1.
THERMAL EXPANSION COEFFICIENTS OF THREE?DIMENSIONAL?BRAIDED COMPOSITES WITH PENNY?SHAPED MICROCRACKS
含圆币型微裂纹三维编织复合材料的热膨胀系数预报
2.
BEM Model of ultrasonic scattering field for penny-shaped crack in solid
固体中币形裂纹散射声场边界元模型
3.
Damage Constitutive Model of Mico-and Meso-cracks of Coal Sample Based on RMT
基于RMT煤的微细观裂纹损伤本构模型
4.
EFFECTIVE MODULI OF AN ELASTIC SOLID WEAKENED BY A PARALLEL ARRAY OF MICROCRACKS
平行微裂纹削弱的弹性体的各向异性有效性能与双周期裂纹模型
5.
INVESTIGATION ON THE MICRO-CRACK DAMAGE MODEL OF BRITTLE ROCK UNDER UNIAXIAL TENSILE LOADING
单轴拉伸条件下脆性岩石微裂纹损伤模型研究
6.
Influence of Micro-forging to the Rapid Prototyping of Laser Cladding Specimen Cracks
微锻造对激光熔覆快速成型试样裂纹的影响
7.
Effects of the Surface Perturbation and the External Stress on the Evolutons of Microcracks;
裂面形貌扰动和外载对微裂纹演变的影响
8.
Prediction of Burst Strength of Oil Well Casing Strings with Micro-Cracks
含微裂纹油井套管的抗内压断裂强度预测
9.
The Analysis of Formation Mechanisms of the Plate Containing Nb、Ti Central Cracking
含铌、钛船板钢心部微裂纹成因初探
10.
Numerical Simulation of Microcrack Toughening in Particulate Composite
颗粒复合材料微裂纹增韧的数值模拟
11.
Pressing sheet metal forming, its substrate should be crack.
压型金属板成型后，其基板不应有裂纹。
12.
A propagation problem on dynamic Dugdale model of mode III crack
Ⅲ型裂纹动态Dugdale模型的扩展问题
13.
CONTINOUS DISLOCATION DISTRIBUTION MODEL OF MODE Ⅲ INTERFACE CRACK UNDER HOMOGENOUSLY DISTRIBUTED SURFACE LOAD
裂纹面受均布载荷作用的Ⅲ型界面裂纹的位错连续分布模型
14.
Research on the crack growth angles of Ⅰ-Ⅱ-Ⅲ mixed mode crack with photoelastic experiment
Ⅰ-Ⅱ-Ⅲ复合型裂纹开裂角的光弹性试验研究
15.
Elastic-Plasticity Analysis of Ⅰ/Ⅱ Mixed Mode Crack and Probability Caculation of Fracture Failure
Ⅰ-Ⅱ型裂纹的弹塑性分析及断裂失效概率计算
16.
Cracking analysis on corner-inclusive shearing fractures for rubber vibration-reduction spacers
含角裂纹剪切型橡胶减振垫的断裂分析
17.
Analysis of the Main Stress Invariants Criterions for Mixed Mode Crack Initiation Angles
混合型裂纹应力不变量断裂准则的分析
18.
In the tie girder boxes crack growth was detected near the crack tip.
在系杆箱型梁中裂纹尖端附近检测到裂纹的扩展。