1.
Investigation on Mixing Enhancement Mechanism of Jet Flow with Tabbed Nozzle;
加小突片喷口射流增强混合的机理研究
2.
Numerical simulation on separation in a diffuser for a pulsed flow vortex-generator jet
非稳态单喷口射流控制扩压器内边界层的分离流动
3.
Influence of Entrance Shrinking Angle on Nozzle Wear in Swirling Abrasive Water Jet
入口收缩角对旋转磨料射流喷嘴磨损的影响
4.
3-D Numerical Simulation and Analysis on Energy Dissipation of Multiple Jets for Pipe Outlet;
输水管道出口多喷孔射流三维紊流数值模拟及消能分析
5.
Furthermore, the horseshoe shape vortex system occurred to the upstream of the jet exit and the layer structure of vortexes occurred to the wake of the reverse flow region downstream of the jet are also investigated.
另外，观测到射流喷口上流的马蹄涡系以及射流逆流区下游尾迹区旋涡的层状结构形式。
6.
balanced flow easy priming jet pump
平衡流量易引动喷射泵
7.
spun-laced fabric
射流喷网法非织造织物
8.
Computation of three-dimensional flow field in secondary gas injection for thrust vectoring nozzle
气体二次喷射矢量喷管三维流场计算
9.
Design of fluidic sprinkler's jet component based on offset jet theory
基于附壁射流理论的全射流喷头射流元件设计
10.
An outlet, such as a nozzle, used for emitting such a stream.
喷嘴用于施放流体的出口，如喷嘴
11.
Study on the Flow Characteristics of Jet-Spouted Fluidized Beds (JSFB);
射流喷动流化床（JSFB）流动特性研究
12.
Flow characteristics of radial jet from two opposed jets
两喷嘴对置撞击流径向射流流动特征
13.
Experimental Study on the Law of Jetting Boost Pressure in Hydrajetting
水力喷射孔内射流增压规律试验研究
14.
A high-velocity fluid stream forced under pressure out of a small-diameter opening or nozzle.
喷射流体在压力迫使下从小喷嘴或小孔中喷出的高速流体
15.
Experimental study of the characteristics of flame jet in crossflow
火焰射流在横向气流中喷射特性的试验
16.
Pre-mixed Abrasive Water-jet Shotpeening Technology
前混合磨料水射流喷丸强化技术的射流参数
17.
continuous stream
连续液流（喷射式钱花机的一种喷墨方式）
18.
CS (continuous stream)
连续液流（喷射式印花机的一种喷墨方式）